Base Installation W/ Latch Bars - The First Years Contigo I480 Instruction Manual

Section 7 - Installation and Use
CRS Connector LATCH Anchor
Points- 7.3
. Consult your automobile's owners
1
manual or manufacturer for location
and availability of LATCH lower
anchor points.
2 -
BOTH
Remove
Anchor connector from the LATCH
Lower Anchor storage compartment.
3-
Attach the right and left LATCH
Lower Anchor to the anchor points.
Press down on the base with your
knee and pull up on the webbing loop
until the webbing is taut.
4-
CHECK level indicator on I480 by
installing on base to ensure the
ball is in the green area.
CHECK base for movement
at the belt path. Base should
not movemore than 1 inch in
any direction.
.
5
If base moves, repeat steps
-
until all safety steps are met.
LATCH Lower
.
 
  

Rear of Vehicle

20