Selecting A Playback Area For A Super Audio Cd - Sony DAV-FXG9K Operating Instructions Manual

Selecting a Playback Area
for a Super Audio CD
Selecting a playback area on
a 2 channel + Multi-channel
Super Audio CD
Some Super Audio CDs consist of a 2 channel
playback area and a multi-channel playback
area. You can select the playback area you want
to listen to.
1
Press
in stop mode.
The Control Menu appears.
2
Press X/x to select
2CH], then press
The options for [MULTI/2CH] appear.
3
Press X/x to select the setting you
want and press
• [MULTI]: plays the multi-channel
playback area.
• [2CH]: plays the 2 channel playback area.
"MULTI" lights up in the front panel
display when playing the multi-channel
playback area.
Note
• You cannot change the playback area during
playback.
Selecting a playback layer
when playing a hybrid Super
Audio CD
Some Super Audio CDs consist of an HD layer
and a CD layer. You can select the playback
layer you want to listen to.
Press SA-CD/CD when the system is in
stop mode.
Each time you press the button, an HD layer or a
CD layer is alternately selected. When playing a
CD layer, "CD" lights up in the front panel
display.
50
GB
DISPLAY when the system is
[MULTI/
.
.
Note
• Each play mode function works only within the
selected layer or playback area.
• When you select a CD layer, you cannot change a
playback area.
• Super Audio CD audio signals are not output from the
HDMI OUT (high-definition multimedia interface
out) jack.