Getting Started - Tesla 2 W8 Complete User's Manual

Tesla 2 W8

GETTING STARTED

Inserting/Removing the MicroSD Card
Your bq Tesla 2 W8 has an internal memory that can be expanded to 32 GB by using
a MicroSD card.
To insert a MicroSD card, follow these steps:
Insert the MicroSD card into the slot, making sure that the metal pins are at the bottom
and facing towards the screen, as shown in the diagram:
Push the card in until you hear a slight click, which indicates that it has been inserted
correctly. If the card is not inserted correctly, the device may not recognise it and its
content will not be available.
To remove the MicroSD card, follow the steps above in reverse, bearing in mind the
following recommendations:
a) For safety purposes, switch the device off before removing the MicroSD
card.
b) If you need to remove the MicroSD card while the device is switched on, first
unmount it in order to avoid damaging the card and losing any data.
To unmount the card, press the triangle icon on the bottom right of the
desktop taskbar. Select the USB connector icon in the box that appears.
When you see a message stating that it is now safe to unmount the MicroSD
card, you can remove it.
Complete User Manual
Getting Started
8
ENGLISH