Table of Contents
Advertisement
The device supports storage cards of up to 32GB.
Insert the card into the card slot, and push it all the way in until you hear a
click. The card is now ready for use.
Removing SD Card
Close all programs or files on the card first. Click Settings > Storage >
Remove SD card > OK. Then press the card, and simply remove it when
the card is ejected.
Do not insert and remove the card repeatedly, this may cause
damage to the card.
We suggest using a reputable storage card brand to ensure
compatibility.
Charging the device
You may use the device while charging it, but this will prolong the charging time.
Connect one end of the AC adaptor to the main supply and the other end to
the micro USB port on the device to charge it (it may take up to 5 hours to
fully charge the device).
The battery icon
full
(it will stop blinking). You may then disconnect the AC adaptor.
Starting the device
Press and hold the power switch for 3 seconds and wait for the system
to start.
Using sD card
Getting started
will blink while the device charging. When the battery is
7
Advertisement
Table of Contents
