Dash Cam Mode Vs. Action Cam Mode; To Start Recording; To Enable/Disable Audio Recording; To Power Off Device - Ojocam OC-0900 Chameleon User Manual

Operation

Dash Cam Mode vs. Action Cam Mode

Ojocam 0900 has two recording modes for different applications:
Action Cam: Shoot normal videos.
Dash Cam: Continuous loop and emergency videos.
Comparison between modes:
Mode Action Cam
Record type Normal
Record trigger
Press
Video Clip
Up to 2 GB
File Size
00:06:36
Display info.
SD card remaining time
Note:
• Loop recording: Once the memory card is full, the camera will continously
overwrite the oldest footage recorded.
• During loop recording, press

to enable/disable audio recording.

• By default, the camera allocates 50% of the microSD card's memory for Action
Cam Mode, and 50% for Dash Cam Mode. This allocation can be adjusted via
the settings in the OjoLink smartphone app.
6 |
English
Dash Cam
Loop Emergency
• Car impact (G-Sensor)
• Press during
in preview
loop recording
One min. section
Three min.
(30 seconds before
sections
and after the event)
2014/01/01 21:06:36
Current date & time
Operation
Operation

To Start Recording:

1. Power on:
Press to turn on camcorder.
2. Record:
Press to start recording.
Press again to stop.
3. Playback:
Press to enter menu settings.
Press to select [Playback
Press [Play ] to play the video
and press [ ] to stop.
4. Return to preview:
Press [ ] to return.
5. Power off:
Press and hold for 2 seconds.
To Start an Emergency Recording:
While in recording mode, press
To Cancel an Emergency Recording:
While in an emergency recording,
press , then to confirm.
Note:
In Dash Cam Mode, the device will power off when power is disconnected from
the unit. A delay in powering off can be specified in the "delay power off" setting
in the OjoLink smartphone app.
Visual Display
The camera turns on with live video
shown, REC flashes in red while
recording.
REC
].
The icon flashes on the top of
!
the bar and displays a progress
percentage of the locked file being
saved.
The emergency mode will be stopped
and return to normal recording mode.
English
| 7