Installation; Operation - Ojocam OC-0900 Chameleon User Manual

Installation

Mounting the Device
To achieve optimal performance from your camera, we recommend
mounting on the front of the windshield, behind the rearview mirror.
This will minimize the impact on the drivers' line of sight. You will also
need to keep the camera centered, and angle the bracket to optimize the
camera's view.
Mounting Steps:
1. Peel the plastic film off the 2. Screw the tripod connector
suction cup. onto the base of the suction
cup mount.
4. Turn on the camera, loosen 5. Press the suction cup firmly
the angle locking ring and onto the windshield.
adjust the angle.
7. Plug the 12 foot Micro USB 8. Plug the power cord into the
cable into the camera. cigarette lighter adaptor.
4 |
English
3. Slide the dash cam onto the
tripod connector.
6. Push down the lever to lock
the suction cup in place.
9. Do a test drive and make
sure the camera is recording.

Operation

Inserting a MicroSD Card
Before initial use, insert a microSD card,
as shown in the picture (suggested at
least 4GB, up to 64GB). Press it in until
you hear a click.
To remove the memory card, push the
memory card forward gently until you
hear a click. The card should release.
Micro SD Card Setup
When SD card is used for the first time, or is reformatted in camera,
user should allocate memory for Action Cam Mode and Dash Cam
Mode.
Go to [Setup] [ Camcorder Settings ]
Adjust slide bar and press [Format]
button to complete SD card setup.
Charging the Unit
Fully charge camera for initial use by:
• Car charger
• PC USB port
• USB adapter (not included)
During charging, when the camera is on, screen shows battery icon or
status indicator flashes in orange. When camcorder is fully charged, the
indicator turns off.
microSD card
| 5
English