Specifications - LAMAR BETA D-50 Operating Manual

7. SPECIFICATIONS

AC Line Input:
Capacity
DC Discharge
Current:
Accuracy
Timer Setting
Accuracy
Digital Voltmeter
Meter Accuracy
Ammeter
Cooling:
Housing:
Height
Outer Dimensions:
Depth
Width
AC Line Cord:
DC Discharge
Cable:
Weight:
Fuses: AC line fuse
DC line fuse
Modes:
BETA D-50 TESTER / ANALYZER - OPERATING MANUAL V2.2
7. SPECIFICATIONS
115 volts ± 10%, 50/60Hz, 3 amperes or
230 volts ± 10%, 50/60Hz, 1.5 amperes
(selectable on rear of unit)
0-50 amperes adjustable current
< ± 2% from discharge initiation to cut-off
Adjustable from 0 to 999.9 minutes
< ± 0.1%
< ± 0.2 volts
< ± 0.2 amperes
Fan cooled
Aluminum chassis
14 in. (356 mm)
15 in. (381 mm)
10 ¼ in. (260 mm)
AWG 16 3 wire grounded
6 ft long with 115 volt 15 ampere plug.
User required to change to 230 volt plug
4 ft long, with Aircraft battery connector
Net 33 lbs.
Shipping 38 lbs.
3A/250V, type MDA 1 ¼ x ¼
70AMAXI Fuse
Analysis (automatic cut-off) and deep
cycle (full discharge) with cutoff set to one
volt.
Page 29