D Accessing the Network Through
the Embedded PPP Dial-Up
Software of the MT880a
If you configure the MT880a through the embedded PPP dial-up software,
the MT880a starts to set up dial-up connection automatically after the
startup. You can access the network after you power on the computer. To
configure the MT880a for the network access, do as follows:
1.
Log in to the Web configuration page.
(1) Launch the Internet Explorer and enter the address 192.168.1.1.
(2) On the login page, enter your user name and password.
The default values are admin (user name) and 3bb (password).
Figure (24)
Figure (25)
15