Saeco PURE HD8765 Operating Instructions Manual page 32

ENGLISH
30
2 Remove the Classic Milk Frother from the steam/hot water wand.
3 Remove the water tank and remove the "INTENZA+" water fi lter from
the water tank if it was installed and replace it with the small white
original one.
4 Pour the entire content of the descaling solution into the water tank
and fi ll it with fresh water up to the calc clean level.
5 Place the water tank back into the machine.
6
Place a large container (1.5l / 50.7 ounces) under both the steam/hot
water wand and the dispensing spout.
7 Press and hold the "
start the descaling process.
The " " button will begin to fl ash and will only stop
when the descaling process is fi nished.
" button for at least 3 seconds to