Operation Of Remote Control - Gree GWC18KG-K3DNA5A Owner's Manual

Operation of remote control

Note: Be sure that there are no obstructions between receiver and remote control; Don't drop
or throw the remote control; Don't let any liquid in the remote control and put the remote control
directly under the sunlight or any place where is very hot.
Remote control
ON/OFF
ON/OFF button
Press this button, the unit will be started or stopped,
●
which can clear the timer or sleeping function of
last time.
MODE
Mode button
Press this button, the running mode will change as
●
below.
AUTO
DRY
HEAT (Note:no for coolling only unit.
As for cooling only unit, it won't have
any action when it receives the signal
of heating operation. )
Names and functions of remote control buttons
Signal transmitter
FAN
AUTO
HEALTH
AIR X-FAN
HUMIDITY
FILTER
TURBO
HOUR
ON/OFF
ON/OFF
MODE
FAN
X-FAN TEMP TIMER
TURBO SLEEP LIGHT
COOL
FAN
(＋/－)
TEMP.
When press +button, the setting temp. will be
●
increased by 1 , When press - button, the
setting temp. will be decreased by 1
The temp. will be changed quickly
the button continuously and setting temp. range
is
16～30℃。
FAN
FAN speed button
Press this button once, fan speed will change
●
as below:
Low speed
High speed
Note: Under the Dry mode, the fan speed isn't
adjustable, low fan speed is imperative,
but when operating this button, the wireless
remote control will send this signal.
Swing up and down button
Simpleness swing mode is defaulted for wireless
●
remote control, in this mode, press this button,
could turn on or turn off the Up and down
swing function.
● When unit is turned off, synchronously press
"+" and Up and down swing buttons, it could
be switched between the simpleness swing
mode and stationary swing mode, at this time,
blinks 2 seconds.
In Stationary swing mode, press this button,the
●
angle for Up and down swing as show in below:
When up and down swing louver is working,
●
when turn off the unit, the siwng louver will
immediately stop at current position.
shows up and down swing louver swings back
and forth as show in the above figure.
6
(＋/－)
button
℃
by pressing
Auto
Middle speed
℃