Frequently Asked Questions; How Does The Charger Work?; What If My Travel Scooter’s Batteries Will Not Charge? - Pride Mobility Go-Go ELITE TRAVELLER Owner's Manual

I V . B A T T E R I E S A N D C H A R G I N G
WARNING! If your battery charger has not been tested and approved for outdoor use, then
do not expose it to adverse or extreme weather conditions. If the battery charger is exposed
to adverse or extreme weather conditions, then it must be allowed to adjust to the difference
in environmental conditions before use indoors. Refer to the manual supplied with the
battery charger for more information.
Follow these easy steps to charge your batteries safely:
1. Position your Travel Scooter or battery pack close to a standard electrical outlet. See figure 15.
2. Remove the key from the key switch.
3. Make certain that the manual freewheel lever is
in the drive (rearward) position.
4. Plug the charger power lead into the charger
power lead receptacle on your Travel Scooter,
then into the electrical outlet. We recommend
that you charge the batteries for 8 to 14 hours.
NOTE: The LED lights on the charger indi-
cate different charger conditions at various
times. See figure 9. Refer to the operating in-
structions supplied with the charger for a com-
plete explanation of these indicators.
5. When the batteries are fully charged, unplug the charger power lead from the electrical outlet and then from the
charger power lead receptacle.
NOTE: There is a charger inhibit function on your Travel Scooter. The Travel Scooter will not run and
the battery condition meter will not operate while the batteries are charging.

FREQUENTLY ASKED QUESTIONS

How does the charger work?

When your Travel Scooter's battery voltage is low, the charger works harder, sending more electrical current to
the batteries to bring up their charge. As the batteries approach a full charge, the charger sends less and less
electrical current. When the batteries are fully charged, the current sent from the charger is at nearly zero
amperage. Therefore, when the charger is plugged in, it maintains the charge on your Travel Scooter's batteries,
but does not overcharge them. We do not recommend that you charge your Travel Scooter's batteries for more
than 24 consecutive hours.
What if my Travel Scooter's batteries will not charge?
! Ensure that the fuse on the battery pack is in working condition.
! Ensure both ends of the charger power lead are inserted fully.
Elite Traveller
Figure 15. Charging The Batteries (Battery Pack Removed)
www.pridemobility.com 23