Location And Function Of Parts; Dfp-D2500 Front Panel - Sony DFP-R3000 Operation Manual

Location and Function of Parts

DFP-D2500 Front Panel

1Power switch
POWER
1 Power switch
2 Level meters
Show the level of each channel.
3 SYSTEM OK indicator
• Lights when the SDDS player system is operating
normally, and goes out when the SDDS player
system error occurs.
• Goes out to indicate a system warning, for example
that the fan has stopped rotating or that there is no
backup battery.
4 PROJECTOR indicators
During playback with a changeover system, shows
which of the projectors is currently in use.
5 EXT FADER indicator
Lights when the remote fader connected to the
REMOTE LEVEL CONTROL connector activates.
When this indicator is lit, the MASTER VOLUME
control becomes disabled.
6(E)
2Level meters
L LC C RC R SW SL SR
OVER OVER
0 0
-6 -6
-20 -20
-34 -34
-60 -60
- -
Sony Dynamic
Digital Sound
qfREMOTE indicator
3SYSTEM OK indicator
4PROJECTOR indicators
5EXT FADER indicator
6DATA PRESENT indicator
7SDDS STATUS indicators
DIGITAL FILM SOUND DECODER DFP-D2500
PROJECTOR DATA PRESENT
SDDS STATUS
1 2 P
S
SYSTEM OK EXT FADER
REMOTE
BYPASS MUTE SDDS AUX
qdBYPASS button
qsMUTE button
qaSDDS button
0AUX button
9MASTER VOLUME dial
8MASTER LEVEL display
6 DATA PRESENT indicator
Lights when the unit is reading SDDS digital audio
signals and can play back.
7 SDDS STATUS indicators
Indicates the playback condition of digital audio
signals in the SDDS format.
SDDS STATUS
P
S
Green Yellow
P green/yellow/red indicators: Each indicator
indicates a playback condition of the digital
signals recorded on the P (picture) side of the film.
S green/yellow/red indicators: Each indicator
indicates a playback condition of the digital
signals recorded on the S (sound) side of the film.
MASTER LEVEL
dB
MASTER
VOLUME
Red