Advertisement
YOYOCam G33 - Complete Command List
Note: CAPITALS (eg. OFF) denote default setting
ARM AND DISARM (Master & User)
Arm (active 20 seconds after command received)
Disarm
GET IMAGE (Master & User)
Capture & send back to me by MMS
Capture & send to Number by MMS
Capture & send to Master Email
Capture & send to Master Email and User Email List #05# (Sent by User)
Capture & send to EmailAddress
DEFINE MASTER
Set me as Master (out of box / after factory reset)
Master - transfer to a new phone number
Set/update Master's Email address
Delete Master's Email address
DEFINE USERS
Add User (UserNumber = User's mobile number)
Add Email to User Email List
Delete User
Delete all Users and User Email List
Change Password
ALARM NOTIFICATIONS
Warning tone upon alarm - OFF
Warning tone upon alarm - on
SMS alert upon alarm - off
SMS alert upon alarm - ON
Message upon alarm - off
MMS upon alarm – ON
(Contains images as per IMAGE SETTINGS below)
Email upon alarm – off
(Contains images as per IMAGE SETTINGS below)
Telephone call at Alarm - OFF
Telephone call at Alarm - on
SMS to Users - OFF
SMS to Users - on
Message to Users - OFF
Message to Users – on
(Contains images as per IMAGE SETTINGS below)
(MMS to Users or Email to User Email List,
with images, as set by #12# above)
TEMPERATURE SENSOR
Get temperature from plug-in sensor
Set temperature range to monitor
Temperature alert - OFF
Temperature alert - on
SCHEDULED ACTIONS
Scheduled arm/disarm - setting
Scheduled arm/disarm - OFF
Scheduled arm/disarm - on
Scheduled image capture & send - setting
Mode: 0 - Email; 1 - MMS
Scheduled image capture & send - OFF
Scheduled image capture & send - on
Day: 0 - Every day; 1 - Mon; 2 - Tue; 3 - Wed; 4 - Thu; 5 - Fri; 6 - Sat; 7 - Sun; 8 - Mon-Fri; 9 -
Weekend (Sat+Sun)
IMAGE SETTINGS
Number of images in alarm message (1 to 5); default 3
Size of image in alarm, get image or scheduled
capture & send. Quality 1: Low (320 x 240),
2: Medium (640 x480), 3: High (1280 x 768)(default)
#01#
#02#
#03#
#03#Number#
#05# (Sent by Master)
#05#EmailAddress#
#00#
#14#NewMasterNumber#
#09#EmailAddress#
#09#
#07#UserNumber#
#07#EmailAddress#
#27#UserNumber#
#27#
#18#OldPassword#NewPassword#
#30#0#
#30#1#
#11#0#
#11#1#
#12#0#
#12#1#
#12#2#
#13#0#
#13#1#
#32#0#
#32#1#
#33#0#
#33#1#
#15#
#16#LoTemp#HiTemp#
#15#0#
#15#1#
#41#Day#ArmTime#DisarmTime#
#04#0#
#04#1#
#43#Mode#Day#StartTime#EndTime#Interval#
#06#0#
#06#1#
#21#Quantity#
#22#Quality#
LED LIGHTING SETTINGS
off (never turned on)
AUTO mode (on when dark and motion detected)
Always (on whenever motion detected, even in bright light)
GET STATUS
Get status
Technical status report (firmware version, IMEI, signal)
ADVANCED SETTINGS
Infrared body detector - off
Infrared body detector - ON
LED status indicator - off
LED status indicator - ON
Power change notification SMS - off
Power change notification SMS - ON
Language – English
Language – SWEDISH
Weak signal alert by SMS – OFF
Weak signal alert by SMS – on
(requires enough signal to send an SMS)
Forward SMS from unknown numbers to Master – ON
Forward SMS from unknown numbers to Master – off
Auto disarm after repeated alarms – OFF
Auto disarm after n alarms – on
CONFIGURE EMAIL SERVICE
Check Email parameters
Configure Email sending parameters (Gmail)
Configure Email sending parameters
(Outlook.com, Hotmail)
Configure Email sending parameters (other)
Note: Internet service must also be configured to be able to send Email.
CONFIGURE MMS AND INTERNET SERVICE
YOYOCam automatically configures MMS and Internet settings for most networks in Scandinavia,
Germany, France, Italy and Spain. Settings for other networks can be configured
manually – see the User Guide.
MMS: Get current settings
#25#
MMS: Configure parameters
#25#MMSC#GatewayIP#WAPGatewayPort#
HTTPGatewayPort#APN#APNusername#APNpassword#MMS#
Internet: Get current settings
#24#
Internet: Configure parameters
#24#APN# APNusername#APNpassword#MCC#MNC#
DataProxyIP#DataProxyPort#DEFAULT#
Reset MMS and Internet
#54#
settings to default
RESET
Remote restart (reboot)
Factory reset (wipes all settings and data
except wireless sensors and remotes).
Factory Reset
If the Master phone is lost or you want to set up YOYOCam again from the beginning, you can
use Factory Reset to set all settings and parameters back to the factory default. Following Factory
Reset you will need to set the Master user, re-enter any mobile network(MMS, Email) settings and
reconfigure all users etc. To perform Factory Reset:
1.
Make sure YOYOCam is switched on, status
2.
Press and hold the Reset key for 5 seconds until YOYOCam beeps.
3.
You may now release the Reset key. Factory Reset is complete.
Alternatively, the Master can send #19#Password#
Reset
key
#20#0#
#20#1#
#20#2#
#10#
#40#
#17#0#
#17#1#
#31#0#
#31#1#
#35#0#
#35#1#
#36#1#
#36#2#
#37#0#
#37#1#
#50#0#
#50#1#
#55#0#
#55#n#
#26#
#62#gmail#EmailAddress#Password#
#62#outlook#EmailAddress#Password#
#26#SenderAddress#password#STMPserver#
SMTP port#SSL#TLS#
#42#password#
#19#Password#
armed or
disarmed.
Advertisement
