For Long Life Use Of Public Display - NEC MultiSync LCD4010 User Manual

HEAT STATUS
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED
OPTION RESET
NOTE 1: IMAGE PERSISTENCE
Please be aware that LCD Technology may experience a phenomena known as Image Persistence. Image Persistence occurs when a
residual or "ghost" image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors' image persistence is not
permanent, but constant images being displayed for a long period of time should be avoided.
To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the
monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.
As with all personal display devices, NEC-Mitsubishi Electronics Display recommends displaying moving images and using a moving
screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.
Please set "SCREEN SAVER", "DATE &TIME" and "SCHEDULE" functions to further reduce the risk of Image persistence.

For long life use of Public Display

< Image Sticking of LCD Panel >
When LCD panel is operated continuously for long hours, a trace of electric charge remains near the electrode inside LCD, and residual or
"ghost" image of previous image may be observed. (Image Persistence)
Image Persistence is not permanent, but when fixed image is displayed for long period, ionic impurities inside LCD are accumulated along
the displayed image, and it is observed permanently. (Image Sticking)
< Recommendations >
For preventing the fast transition to Image Sticking, and for longer life usage of LCD, following are recommended.
1. Fixed image should not be displayed for long period, and changed to another images with short cycle.
2. When no use, please turn off the monitor by remote control, or use Power Management Function of monitor or use Schedule Function of
monitor.
HEAT STATUS
ADVANCED OPTION
STATUS
MONITOR ID
COOLING FAN1
IR CONTROL
COOLING FAN2
TILE MATRIX
BRIGHTNESS
HEAT STATUS
POWER ON DELAY
TEMPERATURE
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
POWER ON DELAY
MONITOR ID
IR CONTROL
TILE MATRIX
HEAT STATUS
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET + -: ADJ
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
DATE & TIME
ADVANCED OPTION
YEAR
MONITOR ID MONTH
IR CONTROL DAY
TILE MATRIX TIME
HEAT STATUS
POWER ON DELAY
DAYLIGHT SAVING
DATE & TIME
SCHEDULE CURRENT DATE
ADVANCED OPTION RESET
JAN. 01. 2004
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
+ -: ADJ
ADVANCED OPTION
MONITOR ID
IR CONTROL
TILE MATRIX
HEAT STATUS
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
ADVANCED OPTION RESET
MONITOR ID
IR CONTROL
TILE MATRIX
HEAT STATUS
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
Information of status for COOLING FAN, BRIGHTNESS
and TEMPERATURE.
COOLING FAN comes to run when inside temperature
ON
ON
NORMAL is over a guaranteed limit.
SENSOR 1 0.0 C / 32.0 F
BRIGHTNESS comes to be decreased when inside
SENSOR 1 0.0 C / 32.0 F
EXIT :RETURN MENU :EXIT MENU
temperature is over guaranteed limit with cooling fun.
In this case warning is displayed on the screen.
Adjusts the delay time from "standby" to "power on"
mode.
3 SEC.
"POWER ON DELAY" time is selectable between 0 and
EXIT :RETURN MENU :EXIT MENU
50 sec.
2004
JANUARY
01
Adjusts the current date and time for internal clock.
00 : 00
YES / NO
You should set this function when you use "SCHEDULE".
TIME
00 : 00 : 00
:SET :RETURN :EXIT MENU
SET EXIT MENU
EXIT
Selecting ADVANCED OPTION reset allows you to reset
all OSM settings from ADVANCED OPTION settings,
except for DATE & TIME, and SCHEDULE.
NO
YES Select "YES" and press "SET" button to restore the
EXIT :RETURN MENU :EXIT MENU
factory preset data.
Press "EXIT" button to cancel and then return the
previous menu.
English-28
1-71
Programs the monitor's working
schedule.
Schedule the power on and
power off with hour and a day of
the week. Also sets the input port.
This OSM can't remove except
EXIT.
(see "NOTE 3" on page 29 for
further information)