Sharp ER-A520 Programming Manual page 14

#929-C: 1. When the Closed Check file is full
1. When Closed Check file is full
Inhibit registration
Registration is continued
#929-D: 1. Taxable status of PLU/UPC (EAN) which are set
as "non-taxable" in PGM mode
1. Taxable status of PLU/UPC (EAN) which are set
as "non-taxeble" in PGM mode
NON-TAXABLE
ACCORDING TO ITS ASSOCIATED DEPT
[JOB#980] ER-A520: MRS = 0000
ER-A530: MRS = 0001
#980-A: 1. Not used (Fixed at "0")
#980-B: 1. Hash department entries effect the Hourly Report totals
1. Hash department effect Hourly Report
No
Yes
#980-C, D: Not used (Fixed at "00")
[JOB#930~939] ER-A520: MRS = 0000
ER-A530: MRS = 0000
RESET REPORT COUNTER
Job# @/FOR
XXXX
JOB #
930 General Z1 report counter
933 Hourly Z1 report counter
934 PLU Z1 report counter
935 Cashier Z1 report counter
936 GLU/PBLU Z1 report counter
937 General Z2 report counter
939 Daily net Z2 report counter
[JOB#942, 943, 969] ER-A520: MRS = 0000000000000
ER-A530: MRS = 0000000000000
GT COUNTER PRESETTING
Job# 0000000000000
@/FOR
JOB #
942 GT2 (Positive GT)
943 GT3 (Negative GT)
969 Training GT
Note: The GT1 is obtained by the following calculation
Equation: GT1=GT2-GT3
929-C
0
1
929-D
0
1
980-B
0
1
"0"
CA/AT
Initial value of Z counter
Function
0
CA/AT
13 digits
Function
ER-A520U/A530U Service mode programming
[JOB#944] ER-A520: MRS = 0000
ER-A530: MRS = 0000
PGM2 mode secret code presetting
944
@/FOR
Note: When the secret code "0" is programmed, the secret code entry
is inhibited.
[JOB#948] ER-A520: MRS = 00
ER-A530: MRS = 00
PROGRAMMING OF THE TRAINING SERVER/CASHIER NO.
948 @/FOR
XX: Server/Cashier No.
[JOB#949] ER-A520: MRS = "
ER-A530: MRS = "
THE TRAINING MODE'S TITLE
949 @/FOR
[JOB#950] MRS = STANDARD KEY LAYOUT
Free key layout (Except for department keys and direct PLU keys.)
Function code is manually
entered
Function code automatically
increments
950
@/FOR
Key No.
XXX: 1 to 130
999 (to inhibit the key)
[JOB#951] MRS = STANDARD KEY LAYOUT
Free key layout (Direct department keys and PLU keys)
Key number is manually entered
951 @/FOR
XXX: 1 to 142
999 (to inhibit the key)
• The Key No. is assigned to each key after depression which will enable a
direct dept. or PLU key to be assigned using PGM2 mode.
• Those keys programmed by this job No. are reassigned if the SRV
Job#950 code is assigned after.
3 – 9
0
XXXX CA/AT
4 digits
0
CA/AT
XX
TRAINING "
** **
TRAINING "
** **
Space
Character Key CA/AT
(12 chara. )
Initial setting
XXX Free key
CA/AT
@/FOR
To inhibit
SBTL
Increment Key No.
Key number automatically
increments
XXX Free key CA/AT
Key No.
@/FOR
To inhibit
SBTL
Increment Key No.