Advertisement
Note: All the installation and operations here should conform to your local
electric safety rules.
When you receive the NVR from the forwarding agent, please check whether there is any visible
damage. The protective materials used for the package of the NVR can protect most accidental
clashes during transportation. Then you can open the box to check the accessories.
Please check the items in accordance with the list (Remote control is optional). Finally you can
remove the protective film of the NVR.
For detailed information of the function keys in the front panel and the ports in the rear panel,
please refer to the User's Manual included in the resource CD.
The model label in the front panel is very important; please check according to your purchase order.
The label in the rear panel is very important too. Usually we need you to represent the serial number
when we provide the service after sales.
Please check the data cable, power cable, COM cable and main boar cable connection is secure
or not.
Important
Please turn off the power before you replace the HDD.
The pictures listed below for reference only
You can refer to the User's Manual for recommended HDD brand. Please use HDD of 7200rpm
or higher. Usually we do not recommend the PC HDD.
For detailed operation instruction, please refer to the User's Manual included in the resources CD.
1. Loosen the screws of the
upper cover and side panel.
2. Fix four screws in the HDD
(Turn just three rounds).
HDD1
3. Place the HDD in accordance with
the four holes in the bottom.
HDD2
1
Advertisement
