Panasonic AW-HE40HWP Operating Instructions Manual page 82

Controls and settings from web screen
● Firmware file
1
Download the latest software to your personal
computer.
Note
● Keep the maximum combined number of characters
to be used for the name of the directory in which
the software will be stored and for the name of the
software which has been downloaded to less than
250 characters.
2
Click the [Browse] button, and specify the
downloaded software.
3
Click the [Execute] button.
The software upgrade check screen is displayed.
After upgrading the software version, be absolutely sure
to delete the temporary Internet files.
82
(continued)
Notes
● An upgrade progress bar appears after you click the
[Execute] button, and the process will take about
1 minute.
● Use the personal computer on the same subnet as
the camera to upgrade the software version.
● Before using the version upgrading software, be
absolutely sure to check the precautions to be
observed, and follow the instructions.
● Use the following files specified by Panasonic
Corporation as the software used for version
upgrading.
UPDATE.HDC
● Do not turn off the unit's power while a software
version is being upgraded.
(A pop-up screen will appear to indicate that the
process is complete.)
● While a software version is being upgraded, do not
attempt to execute any other operations until the
version has been upgraded.