Panasonic AW-HE40HWP Operating Instructions Manual page 58

Controls and settings from web screen
● Main area (IP video display area)
The IP video of the connected camera will be displayed.
While the tally lamp is on, the area frame will turn red.
When the tally lamp is off, the display area will return to
normal.
● When the shooting scenes vary significantly, restrictions
imposed by the graphics processing (GDI) of the
operating system installed may give rise to a phenomenon
called "screen tearing" (where parts of the picture are not
displayed in synchronization) although this will depend on
the personal computer used.
58
(continued)
Notes
● The IP video refresh speed may be reduced and
operations from the web screen may be slower,
depending on the network environment used,
performance of the personal computer or the
mobile terminal, subjects and access count.
● The number of users that can access the unit
may be less than 5 depending on the network
environment.
● When "Disable" is selected for "Tally" (page 47,
page 76), the camera's tally lamp will not light
even when the tally signal is input. However, the
area frame of the main area (IP video display area)
will turn red.