Panasonic AW-HE40HWP Operating Instructions Manual page 72

Controls and settings from web screen
● Preset Setting
Preset Speed Table [Slow, Fast]
Set the preset speed table (Slow, Fast).
During preset playback, preset actions are performed at
Preset Speed (1 to 30) values that are based on the table
set here.
Slow Set the preset speed table to "Slow".
Fast Set the preset speed table to "Fast".
Preset Speed [1 to 30]
There are 30 preset pan-tilt operation speeds when
regenerating the camera direction and other information
which are registered in the preset memory.
Note
● If a high value is selected for the Preset Speed
setting, the image on the screen may shake when
operation stops.
Preset Scope [Mode A, Mode B, Mode C]
Selected here are the setting items to be recalled when
the contents of the preset memory are regenerated.
Mode A Pan, Tilt, Zoom (including digital zoom),
Focus, Iris, Gain, white balance adjustment
value
Mode B Pan, Tilt, Zoom (including digital zoom),
Focus, Iris
Mode C Pan, Tilt, Zoom (including digital zoom), Focus
72
(continued)
● Limitation Setting
This establishes the up, down, left and right limit settings
of the pan-tilt head.
First, move the pan-tilt head to the position where the limit
is to be set, and press the corresponding button below to
set the direction (up, down, left or right) in which the limit
is to be set.
After each setting has been selected, press the [Set]
button to enter the setting.
Use this to save the current position as
Tilt Up
the upward limit.
Use this to save the current position as
Tilt Down
the downward limit.
Use this to save the current position as
Pan Left
the leftward limit.
Use this to save the current position as
Pan Right
the rightward limit.
Use this to enable or disable the limit
Set/Release
setting in each direction.
When the [Set/Release] button is pressed, the tally lamp
of the AW-HE40 blinks.
When a limiter is set, it blinks once; when a limiter is
released, it blinks twice.