Name The Handset; Set The Date And Time; Set The Display Language; Auto Answer - Philips M330 User Manual
Hide thumbs
Also See for M330:
- Short user manual (11 pages) ,
- Extended user documentation (40 pages) ,
- Extended user documentation (40 pages)
Table of Contents
Advertisement
Note
•
Make sure that all the handsets registered to the base
station are M330/M335 in order to have the ECO+
feature functioning properly.
•
When ECO+ is activated, the standby time is reduced.
This is because in ECO+ mode the base station is not
transmitting any signal in standby mode; therefore the
handset needs to “listen” more frequently for signals
from the base station to detect incoming calls or other
requests from the base station. The time it takes for the
handset to access features like call setup, call log, paging,
and phonebook browsing is also delayed. The handset
will not alert you to link loss in case of power loss or
moving out of range.
Name the handset
The name of the handset can be up to 12
characters. It is displayed on the handset screen
in standby mode.
1
Press MENU/OK.
2
Select [Phone setup] > [Phone name],
then press MENU/OK to confirm.
3
Enter or edit the name. To erase a
character, press REDIAL/C.
4
Press MENU/OK to confirm.
» The setting is saved.
Set the date and time
For information, see 'Set the date and time' in
the 'Get started' section.
Set the display language
Note
•
This feature only applies to models with multiple-
language support.
•
Languages available vary from country to country.
1
Press MENU/OK.
EN
2
Select [Phone setup] > [Language], then
press MENU/OK to confirm.
3
Select a language, then press MENU/OK
to confirm.
» The setting is saved.
Auto answer
When you activate the auto answer feature, you
can connect to the incoming call automatically
once you pick up the handset. When you
deactivate this feature, you have to press
or
to answer the incoming call.
1
Press MENU/OK.
2
Select [Phone setup] > [Auto answer],
then press MENU/OK to confirm.
3
Select [On]/[Off], then press MENU/OK
to confirm.
» The setting is saved.
Activate/Deactivate auto hang
up
You can activate the auto hang up function so
that you can end a call by simply placing the
handset on the base station or charge cradle.
1
Press MENU/OK.
2
Select [Phone setup] > [Auto hang-up],
then press MENU/OK to confirm.
3
Select [On]/[Off], then press MENU/OK
to confirm.
» The setting is saved.
Note
•
When auto hang up is deactivated, you can put the
handset to the base station or charging cradle and
continue with your call through the speaker.
Page 22
Hide quick links:
Advertisement
Table of Contents
