Related Manuals for texet DPF-363
Summary of Contents for texet DPF-363
- Page 1 Digital Photo Frame With Alarm Clock Model DPF-363 Transformer 100-240V~ 50Hz, 2.5W Frame input 500mA Please read these instructions before use and retain for future reference...
- Page 2 .……………………………………………………………….6 We would like to thank you for your purchase of a Texet DPF-363. The user manual should be thoroughly read to understand all functionality of the Texet DPF-363. For further information on the TEXET range, please refer to www.texet.com...
- Page 3 SAFETY • FOR HOUSEHOLD AND INDOOR USE ONLY • PLACE THE APPLIANCE ON A FLAT, STABLE SURFACE WITH ADEQUATE VENTILATION AND AWAY FROM OTHER SOURCES OF HEAT. MINIMUM DISTANCES AROUND THE APPLIANCE FOR ADEQUATE VENTILATION IS 5CM. DO NOT COVER OR RESTRICT VENTILATION OPENINGS. •...
- Page 4 PARTS Escape button (ESC) Select button (SEL) Function switch (ON/OFF / Light) Navigation 3456buttons Speaker DC jack USB slave port Card slot Mains adaptor (not shown) USING THE PHOTO FRAME This frame may be positioned so that either photographs are displayed (landscape format fig. 1) or the clock is displayed (portrait format fig.
- Page 5 3.3. Using the photo frame – changing how pictures are displayed. 3.3.1 Whilst the photos are being viewed, press and hold the ESC button and a drop down menu will be displayed on the left hand side of the screen. 3.3.2 Use 5/ 6 buttons to move up and down the menu to highlight the desired function (see below).
- Page 6 SETTING AND USING THE ALARM (setup Menu only available at landscape mode) Following steps 4.1 – 4.4 above, display the clock set up menu. Use the 5/6 buttons to highlight ALARM SETTING and press the SEL button to select. Use the 5/6 buttons to scroll through the alarm field until ENABLE is shown. Use the 3/4 buttons to move to the next field and the 5/ 6 buttons to select the hour and minute.
Need help?
Do you have a question about the DPF-363 and is the answer not in the manual?
Questions and answers