Motion Detection Mode - Black Box SMVB-3010 User Manual

2. How to Operate
2.2
Recording Mode Selection
 Motion Detection Mode
1. When no vehicle movement is detected for continuous ten (10) minutes, SMVB-3010 goes into Motion
Detection Mode, which triple "beeping" sound and the audio guide "Starting Motion Detection Mode."
2. During Motion Detection Mode, SMVB-3010 remains dormant most of the time, indicated by two blinking
LED indicators .
When the motion is detection, recording is working on the audio guide "Motion Detection" with
3.
turn on the LED blue and yellow. (
indicator is turned off.)
The recording file in Motion Detection Mode starts with "REC".
4.
changed
Motion Detection Mode .(But, Motion is keep detection, SMVB-3010 is using Motion Detection
Mode. )
5. SMVB-3010 returns to Normal Recording Mode if car movement is detected for continuous ten (10)
seconds. The switch is reflected by a triple "beeping" and the audio guide "Ending Motion Detection
Mode.", and two fully-lit LED indicators ten (10) seconds later – which signals successful return to Normal
Recording Mode. (But, when the Mute Mode is on, a lit blue LED indicator.)
※ The basic setting is
※ '
Motion Detection Mode' is using on the Ordinary Power Cable.
Vehicle IT innovator!, ATM Co. Ltd.
If Mute is activated while the device is recording, the yellow LED
Motion Detection Mode, and can control on 'SumIT Viewer'.
When the recording is finished, it is
SMVB-3010
19