Table of Contents
Advertisement
2. How to Operate
2.2
Recording Mode Selection
Ordinary Recording Mode
The ordinary Recording Mode start with triple "beeping" sound.
1.
2.
The booting is started with indicated by blue LED.
3.
When the device is turned ON, indicated by two lit LED indicators (blue and yellow) and the
audio guide "recording starts." (But, Mute mode is only indicated blue LED.)
4.
The recording file which takes recording aggressively for one (1) full minute and this mode starts
with "REC".
Event Recording Mode
1.
In the event that rough movement or impact has been detected.
when the device is turned ON, indicated by a lit LED indicators (yellow) and with "ding-dong"
2.
sound. (Mute Mode is also same.)
3.
The recording file which takes recoding aggressively for 20(twenty) seconds and in this mode
starts with "EVT".
4.
The device returns to Ordinary Recording Mode (indicated by two lit LEDs) when event recording
is completed. (But, the damage is continue, the Event Mode recording is still working.)
Vehicle IT innovator!, ATM Co. Ltd.
SMVB-3010
18
Advertisement
Table of Contents
