Samsung WAM7500 User Manual page 47

Symptom
The HUB doesn't work properly. • Is the HUB plugged in?
The WAM speaker doesn't work
properly.
Check
• Is the LAN cable connected to
the wireless router and the HUB
properly?
• When the Hub is plugged in, do
the HUB's front indicators show
it's operating properly?
• Is the product plugged in?
• Does the product's front LED
indicator remain red 5 minutes
after turning on?
4444 47
Remedy
• Plug in the HUB.
• Connect the LAN cable to an
ETHERNET SWITCH
the back of the HUB and to your
wireless router.
• Reset the HUB. (Refer to the HUB's
user manual for details.)
• If you experience troubles with
connecting the HUB and WAM
speaker, try relocating the WAM
speaker so that it is closer to the
wireless router or HUB.
• Plug in the product.
• Check whether the Wi-Fi router
you're using had been certified for
Wi-Fi.
• Unplug the speaker, plug it back
in, and then reconnect it to the
router.
• Reset the WAM speaker. (see page
5)
Click here.
• If used with a HUB
- Make sure your smart device
and the HUB are connected to
the same Wi-Fi network.
- Make sure the HUB's indicator
LED's show that it is working
correctly. (See page 16, item 3.)
Click here.
- If the problem persists, reset the
HUB. (Refer to the HUB's user
manual for details.)
- Unplug, then plug in the HUB.
Then, unplug and plug in the
WAM speaker.
- If you experience troubles with
connecting the HUB and WAM
speaker, try relocating the
speaker so that it is closer to
the wireless router or HUB.
port on