Adding A Hub - Samsung WAM7500 User Manual

Adding a hUB

❚
Your WAM speaker and a HUB may not pair successfully if your speaker and the HUB are too
far apart or are on different floors.
In such cases, you can link two HUBs together by setting the second HUB to Repeater mode.
The additional HUB amplifies the signal and lets you pair your speaker to the closest HUB.
Set the HUB that is connected to the wireless router
1
to Pairing mode by pressing its
second.
Plug in the new HUB you are using as an extender,
2
and then press its
The newly added HUB's LED indicators turn off and
3
on, and it switches to Repeater mode.
Once the connection between the two HUBs has been
4
established, the added HUB's (
blinking.
noteS
9 If your smart device is not connected to your wireless router
with a Wi-Fi connection, your WAM speaker will not appear
on the Samsung Multiroom app.
9 Place the HUB that is in Repeater mode in an appropriate
location between the speaker and the HUB that is connected to the wireless router.
9 You can set only one HUB to Repeater mode.
relocating the product
When relocating your WAM speaker, refer to the below table.
Wireless router
HUB
Without a HUB
With a HUB
Spk Add
Spk Add
button for 10 seconds.
If you want to connect your WAM
speaker to the current wireless router.
Turn off the speaker, relocate it, and then
turn it on.
button for 1
) indicator stops
If you want to connect your WAM
speaker to a different wireless router.
Turn off the speaker, relocate it, then
establish the new connection as described
in the installation instructions on pages 8
through 17.
Connect a LAN cable between the HUB
and the new wireless router, turn on the
HUB, and then turn on the speaker.
4444 18
Product
Used as a
extender
HUB
Click here.