Main Menu; Menu Operation - Optiview OV23X User Manual

After installation, please connect speed dome to power. The system goes on a self-diagnosis,
and then it pops up the above interface to show the system information.
If there is anything wrong during the self-diagnosis, system pops up error code.
The above interface disappears after speed dome received the first command (or the display
time lasts for 40 seconds.)

ADDR: Here you can view dome address information. For example, 001-H, 1 is the address
number, -H is hard address mode. –S is software address mode.

BAUD RATE: Dome communication baud rate.

PARITY: Communication parity bit format.

SOFTWARE: Dome PTZ software version.
Note:
Please set the corresponding control information (address, baud rate and parity)

of the dome in matrix, control keyboard and DVR before using these devices to directly
control the dome.
Please make sure all the cable connections are right.


4.1.2 Main Menu

You can open the IP dome menu via control keyboard, matrix, or speed dome control terminal.

SYSTEM INFORMATION: Dome self-diagnosis information, address information, set north
direction, language, factory default setup, reboot and so on.

DISPLAY INFORMATION: Display dome preset title, azimuth display, direction and etc.

CAMERA PARAMETERS: Display dome white balance setup, exposure setup, day/night
setup, focus setup.

FUNCTION SETTING : Set preset, pan, scan, cruise, pattern, idle motion.

EXIT

4.2 Menu Operation

In the speed dome main menu, you can use the left/right button on the keyboard or in the speed
dome terminal menu to configure the system menu. Before setup, please move the cursor to the
current item you want to configure.

In main menu, please click confirm button to go to the sub menu or use left/right key to
configure setup.

Use up/down button to select back option and then click confirm button to go back to the
previous menu.

Use up/down button to select exit option and then click confirm button to log out system
menu.

All setup here will not lose when encounter power failure.
SYSTEM INFORMATION
DISPLAY SETTING
CAMERA SETTING
FUNCTION SETTING
EXIT
: Log out the system menu.
14