Table of Contents
Advertisement
INSTALLATION continued
DISCHARGE DIRECTION MODIFICATION
The unit comes configured for a front discharge, changing it to a top discharge can be accomplished by
following these instructions. The unit comes with the Vertical Discharged Adapter Assembly & Close-
Off Adapter Bracket, these parts can be re-aquiired
by purchasing pn N1-WL0645 from any authorized
Well Servicer or directly from Wells by
calling (314) 678-6314.
Vertical Discharge
Adapter
Before attempting to perform any maintenance
or modifications: read instructions thoroughly &
disconnect ventilator from power source.
1.
Remove blower access panel
2.
Disconnect clear flexible tube from the blower
pressure tap. Remove flexible distribution tube
from the tank and compression fitting. (See
illustration #2)
3.
First, remove the 2 screws securing the blower
discharge bracket.
4.
Remove 2 of the blower mounting bolts. Support
the blower before removing the 3rd and final bolt.
5.
Rest blower on deck panel while locating the
vertical discharge adapter assembly.
6.
Rotate the blower 90 deg.Clockwise until the
discharge is in the vertical position. (See Fig. 4)
7.
Locate vertical mounting hole locations on the
blower panel and secure blower using previously
removed mounting bolts.
Adapter Bracket
Close-Off
IL2853
10
FLEXIBLE DISTRIBUTION HOSE
FIG #3
FIG #4
BLOWER ACCESS PANEL
BLOWER TUBE CONNECTION
IL2850
BLOWER DISCHARGE
BRACKET SCREWS
BLOWER MOUNTING
BOLT LOCATIONS
VERTICAL MOUNTING
HOLE LOCATIONS
IL2851
Advertisement
Table of Contents
