Hyundai H-MS1113 Instruction Manual page 13

Audio connection system
Two types of audio output systems: analog audio and digital audio. The analogue audio is 2 channel, the
digital audio is outputted from the coaxial, and sound quality is much better than the analogue audio.
Digital audio includes coaxial output.
2 CH output
Use a pair of audio cable (red for right/white for left) to connect the audio input of the TV or AV amplifier
to the audio output of this unit.
Coaxial Digital Audio
Use the special coaxial cable to connect the coaxial output of this unit to the coaxial input of power
amplifier.
Speaker output
Use the specified cable in the accessories to connect this unit to the input of sound boxes.
Note:
The physical connection should accord to the audio output setup of this unit. Please refer to
Audio Setup in System Setup.
Connection of FM/AM antenna
If you would like that the device find the radio stations, please press SOURCE SELECT button, to
change into Radio system.
Note: When you connect frame AM antenna please connect sense and ground wires to the necessary cutoff
points into the rear panel.
13