Operation; Transportation And Storage; Maintenance - Ryobi RSH2845T Original Instructions Manual

SPECIFIC SHREDDER SAFETY RULES

OPERATION

Before starting the product, look into the
feeding chamber to make certain that it is
empty.
Keep your face and body away from the feed
intake opening.
Do not allow hands or any other part of the
body or clothing inside the feeding chamber,
discharge chute, or near any moving part.
Always be sure of your footing. Keep firm
footing and balance. Do not overreach. Never
stand at a higher level than the base of the
product when feeding material into it.
Always stand clear of the discharge zone
when operating the product.
When feeding material into the product be
extremely careful that pieces of metal, rocks,
bottles, cans or other foreign objects are not
included.
If the cutting mechanism strikes any foreign
objects or if the product should start making
any unusual noise or vibration, switch the
product off and allow the cutters to completely
stop. Disconnect the product from its power
supply, and take the following steps:
inspect for damage;
check for and tighten any loose parts;
have any damaged parts replaced or
repaired with genuine Ryobi spare parts.
Do not allow processed material to build up
in the discharge chute as this may prevent
proper discharge or blockage and can result
in kickback of material through the feed
intake opening.
If the product becomes clogged, switch the
product off and allow the cutters to completely
stop. Disconnect the product from its power
supply before clearing debris.
Never operate the product if the guards,
covers, collection box, or other safety devices
are defective, not in place, and not in good
working order.
If dust is created by the shredding process,
wear a suitable dust mask to prevent
respiratory injury.
Do not move or transport the product while
the motor is running.
Switch off the product and disconnect from
2
the power supply whenever you leave work
area.
Do not tilt the product while the motor is
running.
You must never modify parts from the product
or use parts not recommended by Ryobi, this
may increase the risk of serious injury to
yourself or others.
Always ensure that ventilation openings are
kept clear of debris; otherwise, the motor may
overheat resulting in possible damage to the
product or increase the risk of fire.
Switch off the product before attaching or
removing the collection box.
WARNING
Injuries may be caused, or aggravated, by
prolonged use of a tool. When using any
tool for prolonged periods, ensure you take
regular breaks.

TRANSPORTATION AND STORAGE

Make sure that the product has been
thoroughly cleaned before storing it in a
clean, dry place and secured out of the reach
of children.
Allow the product to adequately cool down
before storing or transporting.
When transporting the product, make sure it
is secured against falling or movement within
the vehicle.

MAINTENANCE

Before cleaning, inspecting or servicing the
product, switch it off and allow the cutters
to completely stop, disconnect the electric
supply. After some time of shredding the
cutting mechanism will become hot. Allow
it to adequately cool down before cleaning,
inspecting or adjusting.
WARNING
The cutter blades are extremely sharp. To
avoid injury, exercise extreme caution and
care when cleaning or working near the
blades or inside the opened enclosure when
the collection box is removed. Always wear
heavy-duty protective gloves.