Table of Contents
Advertisement
Switching on
^ Open the stopcock, if it is closed.
^ Open the door.
^ Make sure the spray arms are not
obstructed.
^ Switch the dishwasher on using the
On button U .
The On indicator U and the indicator for
the last used programme light up.
Selecting a programme
Choose your programme according to
the type of load and how dirty it is.
The different programmes and their
uses are described in the Programme
Chart later on in this booklet.
Starting a programme
^ Select the programme required with
the programme selector button.
The indicator light for the programme
selected lights up.
The programme duration will appear in
hours and minutes in the display.
If the Turbo and/or Tab functions have
been selected, the corresponding
indicator(s) will also light up.
You can now select an additional
function (see "Additional functions").
^ Close the door.
The In-operation indicator light comes
on to show that a programme has been
started.
A programme can only be cancelled
in the first few minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.
Operation
35
Advertisement
Table of Contents
