3Com OfficeConnect WL-542 User Manual page 72

70 C 5: C
HAPTER ONFIGURING THE
Routing
R
OUTER
Remote Administration allows you to make changes to your Router's
settings from anywhere on the Internet. You can choose to either:
Click the check box to enable any PC on the network to remotely
■
manage your Router.
Enter one specific IP address that can remotely manage your router.
■
This is more secure, as only the specified IP address will be able to
manage the Router.
Three tabs are presented in the Routing screen:
Routing
■
RIP (Routing Information Protocol) — RIP allows the network
■
administrator to set up routing information on one RIP-enabled device
and send that information to all RIP-enabled devices on the network
Routing table
■
Routing
Figure 58 Routing Parameter Screen
The Routing parameter screen shows a list of current static route entries.
For each entry, the following information is displayed:
Index — the index of the entry.
■
Network Address — the network address of the route.
■
Subnet Mask — the subnet mask of the route.
■
A network address of 0.0.0.0 and a subnet mask of 0.0.0.0 indicates the
default route.