Setting; Obtaining An Ip Address Automatically; Windows 2000 - 3Com OfficeConnect WL-542 User Manual

3
Obtaining an IP
Address
Automatically

Windows 2000

S
ETTING
The Router has the ability to dynamically allocate network addresses to
the computers on your network, using DHCP. However, your computers
need to be configured correctly for this to take place. To change the
configuration of your computers to allow this, follow the instructions in
this chapter.
If you are using a Windows 2000-based computer, use the following
procedure to change your TCP/IP settings:
1 From the Windows Start Menu, select Settings > Control Panel.
2 Double click on Network and Dial-Up Connections.
3 Double click on Local Area Connection.
4 Click on Properties.
5 A screen similar to
TCP/IP and click on Properties.
U Y
P OUR
Figure 8 should be displayed. Select Internet Protocol
C
OMPUTERS