Reactivating Generator System After; Generator Maintenance; Electrical System Wiring - Fleetwood Pace Arrow 1989 Manual

Dr;)11l oil from warm engine.
Relill
t~nylfH-!
crankcJse with fresh oil Jnd change
oil fitter. Use
,j
Ur<1de Jnd weight approprl<Jt8 for
your next operating season temperature ran~Je.
Sl~e
tlener8tor operatlng manual. Attach remlflcier
tog ':;/ith weight and grade.
Ren")ove
spark plug(sl. PI8ce corrosion inhibitor
011 In cylmder(s). Motate cr<JnkC;]S8 3 few times.
Reinstall spark plugls!.
Service air
cleaner
as outlined
in
operating
manual.
Clean governor linkage and cover with clean cloth.
Plug exhaust outlet.
Wipe off entire unit. Coat rustable parts with light
oil or grease.
Remove batteries. See "Preparation For Long Term
Storage".
Reactivating Generator System
After Long Term Storage
• Remove all covers and protective wrappings.
• Wipe off oil or grease from exposed engine parts.
• Remove plug from exhaust outlet.
• Visually inspect unit for damage, insect or animal
intrusion. Be sure carburetor and governor linkages
are free.
• Check oil tag to be sure oil or the proper grade
and weight is in crankcase. CheCk oil level.
• Remove spark plug(s). clean and gap (see
operating manual). Turn the engine over by hand
several times. Reinstall spark plug(s!.
Install batterieS. Be sure ban8r18S :lfI! fully '~harQ­
ed. Observe proper polarity. Ground ·s
rleg;Jtlv~
terminal.
Remove all IOJd iJnd stJrt the uener<Jtor with the
controls at the unit. ThiS Initial stJrt mJy be slow
due to oil or rust Inhibitor in the cv1inders.
E~­
cessive smoke and
rouah operJtlon IS norrn8i un-
til the
oil
or rust
inhib~tor
is
burned off.
Apply a 50°'0 load after the generator runs
smoothly. Allow the generator to warm up for one
hour with the load connected.
Unit is now ready for service.
Generator Maintenance and Service
The generator system is a complex electro·
mechanical device. Although routine maintenance and
service procedures are not beyond the capabilities of
most users, some adjustments and service procedures
are best performed by authorized generator service
facilities. They have the required tools and equipment
necessary to keep your generator operating at peak
efficiency. If you experience repeated difficulty in star·
ting, or signs of incorrect power output or speed and
voltage fluctuations, refer these problems to an
authorized generator service center. You can contact
the generator manufacturer for the location of a ser-
vice facility near you.
ELECTRICAL SYSTEM WIRING
Because of the many model, floor plan and option
variations available, it is beyond the scope. of this
manual to include all wiring diagrams possible. In cer·
tain situations, specific wiring diagrams may be
available to help troubleshoot a problem. If you need
specific wiring information, please contact your dealer.
Complete wiring diagrams are not available.
33