FX-MG8606ZT,MG8606ZT-91,MG8706ZT,MG8706ZT-91
- Removing the Cassette Mechanism Section (Fig.3)
1. Remove the eight screws E.
2. Remove the connector, and then remove the Cassette Mechanism Section.
- Removing the Cassette Mechanism Module (not shown)
1. Remove the four screws, and then Cassette Mechanism Module.
E
- Removing the Control Unit (Fig.4)
1. Unbend the tabs at two locations indicated by arrows until straight.
2. Remove the screw F.
3. Disconnect the two connectors, and then remove the Control Unit.
- Removing the Mechanism Unit (Fig.4)
1. Remove the five screws G, and then remove the four Holders and four Dampers.
2. Remove the two springs A, spring B, and spring C from the hock.
2. Remove the Mechanism Unit from the Chassis.
Holder
G
Damper
82
E
Cassette Mechanism Section
Damper
G
Holder
A
Chassis
E
E
B
Mechanism Unit
C
A
G
Holder
Damper
E
F
E
E
E
F
Control Unit
Damper
G
Holder
G
Fig.3
Fig.4