Sharp 902SH User Manual page 40

Voice Call/Video Call Functions
Note
• You need to set "Call Waiting" to "On" if you use the Call Waiting service (p. 178).
• Call Waiting service may not be available on all networks. Contact your network operator
for more information.
• If you do not wish to answer the second call, press [Options] and select "Busy" in step 1.
If "Reject" is selected, the log of the second call is saved as a missed call.
Conference Call
Conference call is a call with more than 2 participants. You may include up to 5 participants
in a conference call.
To Make a Conference Call
You must have one active call and one held call.
1.
During a call, press [Options] and select "Multi Party".
2.
Select "Conference All" to join the conference call.
3. Press F to end the conference call.
Note
• The conference call service may not be available on all networks. Contact your network
operator for more information.
• You have more options for the Conference call in step 2:
• To put all participants on hold, select "Hold All".
• To put all participants except the current call on hold, select "Private".
40