Sharp 902SH User Manual page 199

Network Settings
To Select a Network Automatically
Each time the power is turned on, your phone always tries to connect to the preferred
network.
If your phone is not connected to the network, you can perform the following immediately
to establish the preferred network connection.
→
"Connectivity" "Network Settings"
→
Network" "Automatic"
To Set the Network Manually
→
"Connectivity" "Network Settings"
→
Network" "Manual"
1.
Select the desired network.
To Add a New Network
→
"Connectivity" "Network Settings"
→
Network" "Add New Network"
If there are no entries, press
If there is an entry, press
1.
Select "Add".
2.
Enter the country code.
Up to 3 digits code can be entered.
3.
Enter the network code.
Up to 3 digits code can be entered.
→
"Network Settings"
→
"Network Settings"
→
"Network Settings"
and go to step 2.
and perform the following steps.
Connectivity
→
"Select
→
"Select
→
"Select
199