Mute/Unmute The Microphone; Paging; Switching The Handset On/Off - iDect Eclipse Plus User Manual

4.6 4.6 Mute/Unmute the M M M M icrophone Mute/Unmute the
4.6 4.6 Mute/Unmute the Mute/Unmute the
When the microphone is muted, the handset displays MUTE ON
your caller cannot hear you.
During a call, press
handsets) to turn on/off the microphone.
4.7 4.7

Paging

Paging
4.7 4.7 Paging Paging
The paging feature enables you to locate a missing handset if the handset
is in range and contains charged batteries.
1. Press the
All the registered handsets that are in range will start to ring.
•
You can stop the paging by pressing any key on a handset or the
under the base unit again.
4.8 4.8 Switching the Switching
4.8 4.8 Switching Switching
Press and hold
additional handsets for more than 2 seconds to switch the handset on or
off in standby mode.
When first turned on, the display shows
•
handset finds the base.
N N N N ote: ote: You can switch the handset off to save battery life, if the handset is ote: ote:
not on the base or a charging pod and you do not want to use it for a
while.
IMPORTANT: IMPORTANT: When the handset is OFF, it cannot be used for making calls
IMPORTANT: IMPORTANT:
including emergency calls. It will not ring when there is an incoming call.
To answer a call, you will need to switch it back on and it may take some
time for the handset to re-establish a radio link with the base unit.
icrophone
icrophone icrophone
m
(Main Eclipse handset) or press
key under the base unit.
the H H H H andset andset O O O O n/ n/ n/ n/O O O O ff ff ff ff
the the andset andset
O
on your main Eclipse Handset or press
SEARCHING SEARCHING... ... ... ...
SEARCHING SEARCHING
27
MUTE ON, and
MUTE ON MUTE ON
m
(additional
O
on the
until the
key