Shortcuts Instructions - Lloyd L40ND User Manual

Getting Started
TV JACK
Audio Cable
(not included)
VGA Cable
(not included)
NOTES
Primarily this unit is intended for use as an LED TV. If you want to use it as a monitor, please
contact the manufacturer of the PC Video/Graphic's card for further support. Perfect compatibility
is not warranted.
The VGA cable will not be supplied with the product.
We strongly recommend to use VGA cable with 2 cores as shown in the figure.
Connecting a headphone
Headphones can be connected to the HEADPHONE output on your set. (While the headphone is
connected, the sound from the built-in speakers will be disabled.)
NOTE
To prevent possible hearing damage, do not listen at high volume levels for long periods.
TV JACK
HEADPHONE
EXTERNAL DEVICES
Computer
EXTERNAL DEVICES
5
Getting Started

Shortcuts Instructions

Turning your TV on and off
1. To turn your TV on: Connect the TV to an AC power outlet and turn on the AC Power ON/OFF switch
and turn on the Power button. A few seconds later an image will appear on the screen.
NOTE
Turn the Power button off when you do not intend to use the TV for long periods, for example
overnight. Remove the connection from the wall power outlet if you do not intend to use the unit for
longer period, for example, if you plan to be away for a few days. Wait at least 5 seconds after
turning off if you want to turn on the TV again.
Selecting the video source
1. Select the video source depending on the video device you have connected to the TV set. TV, AV,
Component, HDMI, VGA and DMP can be chosen as the video source.
2. Press [Source] to select the video source . When the list of video source appears, press [▲/▼] to
select the source, then press [OK] to enter.
Adjusting the volume
Press [VOL+/VOL- ] to increase or decrease the volume. Press [Mute] to turn off the Audio. Press
[Mute] again to turn on the Audio.
Changing channels
Press [CH+/CH-] to go to the previous or next channel. Either, Press the number buttons to select a
channel. For example, to select channel 12, press 1, then 2 within 3 seconds.
Selecting the sound mode
Press [Sound] one or more times to select the sound mode which you want. Standard, Music,
Movie,Sports, User(a mode that you set) mode can be selected.
6