Lloyd L40ND User Manual page 5

Getting Started
Connect to AV devices
1. Connect video terminal to an appropriate external terminal on A/V device such as a VCR, DVD or
Camcorder with a video cable.
2. Connect"R -AUDIO - L" on your set to the corresponding audio terminal with audio cables on the A/V
device.
TV JACK
Red(R) Red(R)
White(L) White(L)
AV Cable
(not included)
Yellow(Video) Yellow(Video)
Connecting Component Devices (DVD/PVR)
1. Component video(Y, Pb, Pr)transmits video as separate Y, Pb, Pr signals. Use this connection for
high-definition video signals from a DVD or other equipment.
2. Connect Component inputs ("PR ","PB ", "Y") and audio(R/L) of your set with Component video and
audio cables to the corresponding component video and audio (R/L)out connectors on the PVR or
DVD. Audio input of Component shared with audio jack of AV IN.
TV JACK
Red(R)
Audio Cable
White(L)
(not included)
P /C
R R
P /C
Component Cable
B B
(not included)
Y
EXTERNAL DEVICES
VCR
R
DVD Player/Recorder
L
Video
Satellite
Set-top box
Camera antenna
cable
Video
Satellite Receiver
A/V OUT Equipment with A/V jacks
EXTERNAL DEVICES
Red(R)
R VCR
White(L)
L
P /C
R R
P
R
P /C
B B
Satellite
P
Video antenna
B
Camera
Y
Y
Equipment with A/V jacks
Component
3
Getting Started
NOTE
The "Y, PB and PR " connectors on your component devices (PVR or DVD) are sometimes marked
with Y, B-Y and R-Y or Y, CB and CR. (Colors for inputs and cables must correspond on both
devices.)
Connect to devices with HDMI interface
Support digital connections between HDMI - enabled AV devices such as PVR, DVD, Blu-Ray, AV
receiver and digital devices.
Some devices such as PVR or DVD player require HDMI signal to be set to output in the device's
settings.
Please consult your device user manual for instructions.
1. Use an HDMI cable to connect the A/V device's HDMI output jack to the TV's HDMI jack.
2. Plug the connected devices into the mains socket before switching on the TV .
3. Select the corresponding source from the TV.
TV JACK
HDMI Cable
(not included)
NOTE
The HDMI connector provides both video and audio signals, it's not necessary to connect the audio
cable.
Connecting a PC with VGA Cable
1. Use a VGA cable to connect the PC's VGA output jack to the TV's VGA jack. Use an audio cable to
connect the PC's audio output jack to TV's PC AUDIO IN jack.
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
EXTERNAL DEVICES
DVD Player/Recorder
Set-top box
Equipment with HDMI jacks
4