external adjustment
Menu
1.9.2
climate system
Setting range: -10 to +10 or desired room temperature if the room sensor
is installed.
Default value: 0
Connecting an external contact, for example, a room thermostat or a timer
allows you to temporarily or periodically raise or lower the room temperature.
When the contact is on, the heat curve offset is changed by the number of
steps selected in the menu. If a room sensor is installed and activated the
desired room temperature (°C) is set.
If there is more than one climate system the setting can be made separately
for each system.
40
Chapter 3 |
F470 – at your service
NIBE™ F470