Ink Ribbon And Paper; Specifications - Sony UP-55MD Instructions For Use Manual

Ink Ribbon and Paper

Do not re-use
Doing so may result in malfunction and
negatively affect printing results.
Both paper and an ink ribbon are necessary for printing.
Use the ink ribbon with the paper contained in the same
package.
UPC-55 Color Printing Pack
Contains color ink ribbon cartridge and paper.
Color ink ribbon for 100 sheets, 2 rolls
Paper, 1 package (100 sheets) ×2
Note
If the paper has been exhausted, replace the ink ribbon
together with the paper.

Specifications

Power requirements
100 to 120 V AC, 50/60 Hz
(for 100 to 120 V AC users)
220 to 240 V AC, 50/60 Hz
(for 220 to 240 V AC users)
Input Current 2.8 A max. at 25 °C
(for 100 to 120 V AC users)
1.2 A max. at 25 °C
(for 220 to 240 V AC users)
Operating temperature
5 °C to 35 °C (41°F to 95°F)
Operating humidity
20% to 80% (no condensation allowed)
Operating pressure
700 hPa to 1,060 hPa
Storage and transport temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage and transport humidity
20% to 90% (no condensation allowed)
Storage and transport pressure
700 hPa to 1,060 hPa
Dimensions Approx. 280 × 125 × 398 mm (w/h/d)
(11 1/8 × 5 × 15 3/4 inches) (excluding
the projection parts)
Mass Approx. 9 kg (19 lb 13 oz)
Printing system
Sublimation heat transfer printing
Printable pixels
When printing the full-image: 2528 ×
1920 dots
Total gradation 256 levels each for yellow, magenta,
and cyan
Printing time When the printer is set to high speed:
Approximately 20 seconds
Thermal head 14.93 dots/mm
TV system Selectable with the dip switch for
NTSC/PAL selection
In NTSC mode: NTSC/480i
In PAL mode: PAL/575i
Input connectors
RGB/Component (BNC × 3):
0.7 Vp-p
SYNC ON G
SYNC (BNC × 1)
0.3 to 4 Vp-p, sync negative
S VIDEO (4-pin mini-DIN × 1):
Y: 1 Vp-p, sync negative
C: 0.286 Vp-p (NTSC), 0.3 Vp-p
(PAL)
VIDEO (BNC × 1) :
1 Vp-p, sync negative
AC IN (for power input)
Ink Ribbon and Paper / Specifications
65