4
Troubleshooting
Software Update
When the MUSICflow product is connected to your home
network, check whether the firmware version is the latest on all
speakers and the Music Flow Player application.
Your MUSICflow product might require a more recent firmware
to be installed for optimal operation.
[Settings à Version Info]: you can check if your speaker has the
latest firmware.
How can I initialize speaker?
If you press down
network related settings are initialized. (For sound bar, "DISABLED"
is displayed in the display window.)
If you press down
factory initialization is performed. (For sound bar "RESET" is
displayed in the display window.)
Speaker is not connected.
1. For a speaker that is already connected, make sure the
P8350B-M0.BUSALLK_SIM_ENG_MFL68922630.indd 23
Troubleshooting
phone is connected to the same router as the speaker. If not,
connect to the same router, also check the following.
1-1. Set Power off / on, and check the connection.
1-2. If it is not solved by 1-1, close the application and run
again.
1-3. If it is not solved by 1-2, reset the Speaker and
reconnect. To reset, press and hold the "ADD" button for
8 seconds until you hear one beep.
1-4. If it is not solved by 1-3, delete the App and reinstall,
then try again. To reset, press and hold the
button for 8 seconds until you hear one beep.
(ADD) button until Beep sounds once, the
(ADD) button until Beep sounds twice,
Troubleshooting
(ADD)
2015-04-02
23
2:31:55