Page 2
The standard PD Movie Remote Air Models PD1 and PD2, whether a High Torque version or the Standard Torque versions, will accurately control your lens and camera wirelessly. You will need to provide a pro-style (Sony V-Mount or Anton Bauer) battery or power source of 12-20V from a P-tap to power your reciever and the motors.
What’s Included: Single Channel (Focus) Dual Channels Name (Focus, Zoom) Wireless Remote Reciever/ Motor Controller Follow Focus Motor (EF) Follow Focus Motor (MAX) P-Tap Cord USB Charging Cable Motor Drive Line USB Charger Strap Short Antenna Antenna 15 to 19mm Adapter Ring Hard Case...
To return to Standard Mode, press the nerve button seven times and the indicator light will blink when the mode has switched. Included in the PD1, PD2 Kits are extra gears to adapt to different lenses. A .4, .5, .6 Pitch gears & three hex screws are included in the kit and can be installed onto the motors existing .8 gear.
Page 5
Transmitter Button Controls & Operation BUTTON / CONNECTION FUNCTION INSTRUCTIONS Hold the On/Off button for 2 seconds, until display powers up. Then select a channel on both receiver and transmitter and observe the signal strength. When signal strength reaches 100% ON / OFF CHANNEL ON/OFF you may begin automatic scan of lens.
Page 6
LCD Display Info Line 1: Frequency = 2.4 Ghz Channel = 1-20 Channels Line 2: Signal Level = Signal Connection. If no response, please restart receiver. Display on Transmitter & Receiver Line 3: TX (Transmitter) = Battery level Volts. Normal Operating Range. RX (Receiver) = Battery Level Volts.
Page 7
PD Movie Standard Drive Motor PD Movie Antenna Assembly PD-SHRT-ANT PD Movie Remote Air 2 PD-PD1RX PD Movie Short Antenna PD Movie PD1 Receiver PD2-HT PD-CHRG PD-PD2RX PD Movie Remote Air High Torque PD Movie USB Power Adapter PD Movie PD2 Receiver...