Table of Contents
Advertisement
To add a new event, click 'New' button and the descriptions of every
setup item is listed below:
Item
Enable Setting
Title
Motion
Detection
Digital Input 1
Enable
Schedule Time
Enable FTP
Enable EMAIL
Enable Samba
(Net Storage)
Enable SD
CARD
Trigger digital
output for xx
second(s).
Description
Check this box to enable this event. If you just want
to disable this event temporarily, you can uncheck
this box to keep this event and disabling while not
deleting it.
Input any description text for this event so you can
identify it quickly. You can use alphabets, numbers,
and symbols include: !$-.@^_~ (no spaces allowed).
Check this box and this event will be activated when
one of motion detection window detects motion.
Check this box and this event will be activated when
"Digital Input 1" input signal is high or low (select
from dropdown list).
Check this box and this event will be activated when
designated weekday and time is reached.
You also have to check weekday box, and select time
from dropdown list. If you select 'Always' as time,
this event will be activated during all the day.
Check this box and IP camera will save file on FTP
server (refer to 'FTP Server' setting in 'Event Server'
tab) when this event is activated.
Check this box and IP camera will send an Email to
designated recipient address (refer to 'SMTP Server'
setting in 'Event Server' tab) when this event is
activated.
Check this box and IP camera will save file on samba
server (refer to 'Samba Server' setting in 'Event
Server' tab) when this event is activated.
Check this box and IP camera will save file on SD card
when this event is activated. A working SD card must
be inserted into IP camera in advance.
Check this box and IP camera will trigger digital out
to 'high' state for xx seconds when this event is
activated, where 'xx' seconds must be defined by the
dropdown list.
52
Advertisement
Table of Contents
