Table of Contents
Advertisement
on LAN automatically.
DHCP IPv4 / IPv6: Obtain both IPv4 and IPv6 address
from DHCP server on LAN automatically.
Static IPv4 / IPv6: Assign an IPv4 / IPv6 address to IP
camera manually. If you don't have a DHCP server on
your local area network, you must use this option to
specify an IP address.
IP Address(IPv4): Input IPv4 IP address*
IP Address(IPv6): Input IPv6 IP address*
Prefix Length: Input IPv6 IP address' prefix length
(0-128)
Subnet Mask: Input subnet mask
Gateway: Input gateway address
Primary DNS: Input DNS server's IP address
Secondary DNS: Input backup DNS server's IP
address, you can leave this field blank.
* You can leave this field blank, if you only wish to
use IPv4 or IPv6 IP address.
Enable UPnP Discovery: Check this b ox to enable other
devices on network to discover the presence of this IP
camera by UPnP. It's recommended to enable this
function.
Enable UPnP Port Mapping: When UPnP is enabled,
check this box to enable UPnP's port mapping.
27
Advertisement
Table of Contents
