Adjusting The Direction Of Air Circulation; Operation - Fujitsu ASTA24LFC Operating Manual

ADJUSTING THE DIRECTION OF AIR CIRCULATION

G Adjust the up, down, left, and right AIR directions with the AIR DIRECTION buttons on the Remote Controller.
G Use the AIR DIRECTION buttons after the Indoor Unit has started operating and the airflow-direction louvers have
stopped moving.
Vertical Air Direction Adjustment
Press the SET button (Vertical) (Fig. 6 S).
Each time the button is pressed, the air direction range will change as follows:
1
Types of Air flow Direction Setting:
1,2,3 : During Cooling/Dry modes
4,5,6 :
During Heating mode
The Remote Controller's display does
not change.
G Use the air direction adjustments within the ranges shown above.
G The vertical airflow direction is set automatically as shown, in accordance with
the type of operation selected.
During Cooling/Dry mode : Horizontal flow 1
During Heating mode
G During AUTO mode operation, for the first minute after beginning operation,
airflow will be horizontal 1; the air direction cannot be adjusted during this pe-
riod.
G Direction 1
2
Only the direction of the Air Flow Direction Louver changes; the direction of the
Power Diffuser does not change.
Horizontal Air Direction Adjustment
Press the SET button (Horizontal)(Fig. 6 T).
G Each time the button is pressed, the air direction range will change as follows:
1
The remote controller's
display does not change.
9315345301_OM_EN_body
2 3 4 5
1
2
3
4
5
6
: Downward flow 5
2 3 4 5
1
2
3
4
10
R DANGER!
G Never place fingers or foreign objects in-
6
G Always use the Remote Controller's
G During use of the Cooling and Dry
G When used in a room with infants, chil-
5
3/22/10, 10:40 AM
side the outlet ports, since the internal fan
operates at high speed and could cause
personal injury.
SET button to adjust the vertical airflow
louvers. Attempting to move them
manually could result in improper op-
eration; in this case, stop operation and
restart. The louvers should begin to
operate properly again.
modes, do not set the Air Flow Direc-
tion Louvers in the Heating range (4 -
6
) for long periods of time, since wa-
ter vapor may condense near the out-
let louvers and drops of water may drip
from the air conditioner. During the
Cooling and Dry modes, if the Air Flow
Direction Louvers are left in the heat-
ing range for more than 30 minutes,
they will automatically return to posi-
tion 3.
dren, elderly or sick persons, the air
direction and room temperature
should be considered carefully when
making settings.
10