Product Features - Guardian pureguardian Use & Care Instructions Manual

pRODUCT FEATURES

pOWER bUTTON
· Turns humidifier ON/OFF.
· MIST CONTROL
The spray volume or amount of
mist that is produced by the unit
can be adjusted based on need.
· low · med · high
SILVER CLEAN TECHNOLOGY
Unlike other humidifiers that grow slimy mold and mildew, the pureguardian
uses Silver Clean technology embedded in the tank to fight the growth of mildew and mold on the
TM
surface of the water tank.
E-6
NIGHT LIGHT
An LED illuminates the tank
for a soft glow night light.
WATER REFILL INDICATOR
When the unit is low on water the
Power Button Light turns red, and
the unit will shut off. Simply add
more water to continue use. Unit
will automatically resume running
when water tank has been refilled.
Ultrasonic Humidifier
TM
CLEANING
CLEANING
• Always unplug the unit before servicing in any way.
GENERAL CLEANING
• Inside the base of the unit. Pour excess water out of the unit. Wash out the unit with fresh
water using the cleaning brush and a soft cloth as needed. Do not submerse the base of the
unit into water, or allow water to enter inside the dry air exhaust port of the unit.
• Water tank. Empty water tank. Remove mist nozzle and clean the mist tube with fresh water
and a light brush (bottle cleaning brush is recommended).
• Outer surface of the unit. Wipe the surface of the unit with a soft, damp cloth if needed. If
you notice an accumulation of water during usage, reduce humidity and dry outer surface with
a cloth.
DESCALING
• Depending on usage and water type, cleaning to remove scale may be required
weekly or every other week to optimize unit performance.
• If you live in a hardwater area, we recommend the use of distilled water for your
humidifier. This will help reduce the precipitation of minerals or 'white dust'.
• Do not clean the unit or water tank with detergents or cleaning chemicals of any kind.
ULTRASONIC DISk
1. Unplug unit.
2. Remove the tank and empty all water from unit base and tank.
3. Locate the ultrasonic disk on the inside center of the base unit. (see pg. E-4)
4. Use ONLY the enclosed cleaning brush to gently clean disk and remove build up and deposits.
Do not scrub or scrape the ultrasonic disk.
*Clean the disk with the
brush only. No other
cleaning tool should
be used. BRUSH ONLY.
Ultrasonic Disk
E-7