Sony DAV-C450 Operating Instructions Manual page 75

Ser "AUDIO" to "STEREO" in the Control
Menu display (page
47).
Make sure pu connect
the system
appropriaiely.
iMake
SLKC
the souucl field function is on
Check the speaker connections <and settings
(pages 25,70).
Depending on the IIVD, the output signal
may not be the entire 5.1 channels. It may be
mona~~ralor stereo even if the sound track is
recorded in Dolby Digital format.
_-_~ -.. .--"--
(pages 25,7(I).
Depending on the DVD. the output signal
may not be the entire 5.1 ch,anncls. It m2ty be
mona~~ml or stereo even if the sound track is
reeorclccl in Dolby Digital or MPEG audio
format.
from the center speaker only.
_II~_..____ .-.. - _l_l
Make sure the sound held function is on
(page 49).
Select a sound field containing the word
"cineretna" or "virtuaf" (page 4.9).
Male sure the sound field function is on
(page 49).
Select a sound held containing the word
"cinema" or "virtual" (page 49).
without closing the disc tray, the disc tray
indicator turns on. Wait a while for it to turn
off. If the indicator is still on, press & of
DISC I-DISC 5 to close the disc tray.
Check that the antennas are comlected
securely. Adjust the antennas and connect an
external antenna if necessary.
The signal strength of the stations is too weak
(when tuning in with automatic tuning). Use
direct tuning.
No stations have been preset or the preset
sintions have been cleared (when tuning by
scanning preset stations). Preset fhe stations
(page 30).
Press DISPLAY so that the frequency appears
in the display.
the system.
'the distance between the remote and the
system is too far.
The remote is not pointed at the remote
sensor on the system.
The batteries in the remote are weak.
There is no disc inside.
The disc is turned over.
Insert the disc with the pl@aek side facing