Speed Control - Dodge avenger 2013 User Manual

OPERATING YOUR VEHICLE

SPEED CONTROL

• The electronic speed control switches are
located on the steering wheel.
Cruise ON/OFF
• Push the ON/OFF button to activate the
Electronic Speed Control.
• CRUISE will appear on the instrument
cluster to indicate the Electronic Speed
Control is on.
• Push the ON/OFF button a second time to
turn the system off.
SET
• With the Speed Control on, push and re-
lease the SET – button to set a desired
speed.
Accel/Decel
• Once a speed is set, pushing the RES + button once or the SET – button once will increase
or decrease the set speed approximately 1 mph (2 km/h).
• Push and hold the RES + button to accelerate in 5 mph (8 km/h) increments or push and
hold the SET – button to decelerate in 5 mph (8 km/h) increments; release the button to
save the new set speed.
Resume
• To resume a previously selected set speed in memory, push the RES + button and
release.
Cancel
• Push the CANCEL button, or apply the brakes to cancel the set speed and maintain the
set speed memory.
• Push the ON/OFF button to turn the system off and erase the set speed memory.
20