Page 1
Avenger 2 0 1 2 O W N E R ’ S M A N U A L...
Page 2
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name This manual illustrates and describes the operation of Chrysler Group LLC shall be deemed to be deleted and the features and equipment that are either standard or optional name Chrysler Canada Inc.
4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized Congratulations on selecting your new Chrysler Group dealer knows your vehicle best, has factory-trained tech- LLC vehicle. Be assured that it represents precision nicians and genuine MOPAR parts, and cares about workmanship, distinctive styling, and high quality - all your satisfaction.
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against op- erating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a accident resulting in serious injury or death. Stamped VIN Location NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....12 Vehicle Security Alarm — If Equipped ..18 Ignition Key Removal .
Page 12
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Using The Panic Alarm ....25 Auto Window Down — If Equipped ..35 Programming Additional Transmitters .
Page 13
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 Automatic Locking Retractor Mode (ALR) — Advanced Front Air Bag Features ..60 If Equipped ......51 Air Bag Deployment Sensors And Controls .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS The authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your authorized dealer.
Page 15
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 occurs, place the shift lever in PARK, rotate the key to the right slightly, then remove the key as described. If a malfunction occurs, the system will trap the key in the ignition switch lock cylinder to warn you that this safety feature is inoperable.
Page 16
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE after the ignition switch is turned to the LOCK posi- WARNING! (Continued) tion. Opening either front door will cancel this feature. • Allowing children to be in a vehicle unattended is The time for this feature is programmable. Refer to dangerous for a number of reasons.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 Key-In-Ignition Reminder SENTRY KEY Opening the driver’s door when the key is in the ignition The Sentry Key Immobilizer System prevents unauthor- sounds a signal to remind you to remove the key. ized vehicle operation by disabling the engine.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE seconds for a bulb check. If the Vehicle Security Light CAUTION! (Continued) remains on after the bulb check, it indicates that there is • The Sentry Key Immobilizer system is not com- a problem with the electronics.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 At the time of purchase, the original owner is provided 2. Insert the first valid key into the ignition switch. Turn with a four-digit Personal Identification Number (PIN). the ignition switch to the ON/RUN position for at least This PIN is required for authorized dealer replacement of three seconds, but no longer than 15 seconds.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • This device must accept any interference that may be The new Sentry Key is programmed. The Remote Keyless Entry (RKE) transmitter will also be pro- received, including interference that may cause unde- sired operation.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 Rearming The System Security Alarm is arming. During this period, if a door is If something triggers the alarm, and no action is taken to opened, the ignition switch is turned to ON/RUN, or the disarm it, the Vehicle Security Alarm will turn off the power door locks are unlocked in any manner, the horn after three minutes, turn off all of the visual signals...
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If the Vehicle Security Alarm is armed and the battery • The driver’s door key cylinder and the trunk button on becomes disconnected the Vehicle Security Alarm will the RKE transmitter cannot arm or disarm the Vehicle remain armed when the battery is reconnected.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 The interior lights will fade to off after approximately NOTE: • The line of transmission must not be blocked with 30 seconds or they will immediately fade to off once the ignition switch is turned to ON/RUN from the OFF metal objects.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the To Unlock The Doors Press and release the UNLOCK button on the RKE following procedure: transmitter once to unlock the driver’s door, or twice to 1.
Page 25
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 cause the alarm to sound. Press the UNLOCK button to 2. Release both buttons at the same time. deactivate the Vehicle Security Alarm system. 3. Test the feature while outside of the vehicle by press- Flash Lights With Lock ing the LOCK/UNLOCK buttons on the RKE transmitter The feature will cause the turn signal lights to flash when...
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the equipped with EVIC. For details, refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings following steps: (Customer-Programmable Features)” in “Understanding 1. Press the LOCK button on a programmed RKE trans- Your Instrument Panel”...
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Opening a door with the alarm activated will cause the NOTE: You may need to be close to the vehicle when alarm to sound. Press the UNLOCK button to deactivate using the RKE transmitter to turn off the Panic Alarm due the Vehicle Security Alarm.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. With the RKE transmitter buttons facing down, use a 2. Remove and replace the battery. Avoid touching the flat blade screwdriver to pry the two halves of the RKE new battery with your fingers. Skin oils may cause transmitter apart.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 If your RKE transmitter fails to operate from a normal How To Use Remote Start distance, check for these two conditions. All of the following conditions must be met before the engine will remote start: 1.
Page 30
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Remote Start Aborted — Hood Ajar WARNING! • Remote Start Aborted — Trunk Ajar • Do not start or run an engine in a closed garage or • Remote Start Aborted — Fuel Low confined area.
Page 31
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 • For security, power window operation is disabled To Exit Remote Start Mode Without Driving The when the vehicle is in the Remote Start mode. Vehicle Press and release the REMOTE START button one time or •...
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS WARNING! Manual Door Locks • For personal security and safety in the event of an To lock each door, push the door lock knob on each door accident, lock the vehicle doors as you drive as trim panel downward.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 CAUTION! An unlocked vehicle is an invitation to thieves. Always remove the key from the ignition and lock all of the doors when leaving the vehicle unattended. Power Door Locks A door lock switch is located on the driver and passenger door panel.
Page 34
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Door Locks — If Equipped 5. The doors were not previously unlocked. The auto door lock feature default condition is enabled. 6. The vehicle speed is 0 mph (0 km/h). When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 3. Press the power door unlock switch to unlock the Child-Protection Door Lock System — Rear doors. Doors To provide a safer environment for children riding in the 4. A single chime will indicate the completion of the rear seat, the rear doors of your vehicle have a Child- programming.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Child-Protection Door Locks are located inside the WARNING! rear edge of the door. Insert the tip of the ignition key or similar flat-bladed object into the lock and rotate approxi- Avoid trapping anyone in a vehicle in a collision. mately one-quarter turn to the lock or unlock position (as Remember that the rear doors can only be opened indicated by the stamped icons).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 WARNING! Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the win- dows while operating the power window switches. Such entrapment may result in serious injury or death.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To cancel the Auto-Down movement, operate the switch Auto Window Up With Anti-Pinch Protection— If either in the up or down direction and release the switch. Equipped Lift the window switch fully upward to the second For vehicles not equipped with the Electronic Vehicle detent, release, and the window will go up automatically.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 • Any impact due to rough road conditions may trigger Window Lockout Switch the auto reverse function unexpectedly during auto- The window lockout switch on the driver’s door allows closure. If this happens, pull the switch lightly to the you to disable the window control on the other doors.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Wind Buffeting TRUNK RELEASE Wind buffeting can be described as the perception of Use the Remote Keyless Entry (RKE) pressure on the ears or a helicopter-type sound in the transmitter to open the trunk from ears.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 With the ignition switch in the LOCK position or with the Trunk Internal Emergency Release key out, the word “dECK” will display until the trunk is As a security measure, a Trunk Internal Emergency closed.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Knee bolsters/blockers for front seat occupants OCCUPANT RESTRAINTS Some of the most important safety features in your • Front seat belts incorporate pretensioners that may vehicle are the restraint systems: enhance occupant protection by managing occupant •...
Page 43
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 infant and child restraint systems. For more information Children that are not big enough to wear the vehicle seat on LATCH, refer to Lower Anchors and Tether for belt properly (see section on Child Restraints) should be CHildren (LATCH).
Page 44
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. The driver and front passenger seats should be WARNING! moved back as far as practical to allow the Advanced • Relying on the air bags alone could lead to more Front Air Bags room to inflate. severe injuries in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 Research has shown that seat belts save lives, and they WARNING! (Continued) can reduce the seriousness of injuries in an accident. • Supplemental Side Air Bag Inflatable Curtain Some of the worst injuries happen when people are (SABIC) and Seat-Mounted Side Air Bags (SAB) thrown from the vehicle.
Page 46
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • Wearing your belt in the wrong place could make • Be sure everyone in your vehicle is in a seat and your injuries in an accident much worse. You using a seat belt properly.
Page 47
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2. The seat belt latch plate is above the back of the front seat, next to your arm. Grasp the latch plate and pull out the belt.
Page 48
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you.
Page 49
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 4. Position the lap belt across your thighs, below your WARNING! abdomen. To remove slack in the lap belt portion, pull up • A belt that is worn under your arm is dangerous. on the shoulder belt.
Page 50
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the belt, push the red button on the buckle. WARNING! The belt will automatically retract to its stowed position. • A lap belt worn too high can increase the risk of If necessary, slide the latch plate down the webbing to allow the belt to retract fully.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 Lap/Shoulder Belt Untwisting Procedure Adjustable Upper Shoulder Belt Anchorage Use the following procedure to untwist a twisted lap/ In the front seat, the shoulder belt can be adjusted shoulder belt. upward or downward to position the belt away from your neck.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE As a guide, if you are shorter than average, you will Driver Center Passenger prefer a lower position, and if you are taller than average, First Row you will prefer a higher position. When you release the Second Row anchorage, try to move it up or down to make sure that •...
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 Automatic Locking Retractor Mode (ALR) — If 3. Allow the belt to retract. As the belt retracts, you will Equipped hear a clicking sound. This indicates the safety belt is In this mode, the shoulder belt is automatically pre- now in the Automatic Locking Mode.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Energy Management Feature NOTE: These devices are not a substitute for proper seat This vehicle has a safety belt system with an Energy belt placement by the occupant. The seat belt still must be Management feature in the front seating positions to help worn snugly and positioned properly.
Page 55
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 How The Active Head Restraints (AHR) Work The Occupant Restraint Controller (ORC) determines whether the severity, or type of rear impact will require the Active Head Restraints (AHR) to deploy. If a rear impact requires deployment, both the driver and front passenger seat AHRs will be deployed.
Page 56
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Grasp the deployed AHR from the rear seat. CAUTION! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of an accident.
Page 57
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 1 — Downward Movement 3 — Final Downward Movement To Engage Locking Mechanism 2 — Rearward Movement...
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For safety reasons, have the Active Head Restraints 4. The AHR front soft foam and trim half should lock into the back decorative plastic half. checked by a qualified specialist at an authorized dealer.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 Light remains illuminated until the respective seat belts NOTE: Although BeltAlert has been deactivated, the are fastened. The driver should instruct all other occu- Seat Belt Reminder Light will continue to illuminate pants to fasten their seat belts.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE extender should be used only if the existing belt is not instrument panel, above the glove compartment. The long enough. When it is not required, remove the ex- words SRS AIRBAG are embossed on the air bag covers. tender, and store it.
Page 61
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 The Advanced Front Air Bags have a multistage inflator This vehicle is equipped with Supplemental Side Air Bag design. This allows the air bag to have different rates of Inflatable Curtains (SABIC) to protect the driver, front, inflation that are based on the severity and type of and rear passengers sitting next to a window.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Front Seat Belt Pretensioners, Seat Belt Buckle Switch, Air Bag System Components Your vehicle may be equipped with the following air bag and Seat Track Position Sensors system components: Advanced Front Air Bag Features •...
Page 63
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 Supplemental Seat-Mounted Side Air Bags (SAB) WARNING! Supplemental Seat-Mounted Side Air Bags (SAB) may • No objects should be placed over or near the air provide enhanced protection to help protect an occupant bag on the instrument panel, because any such during a side impact.
Page 64
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When the air bag deploys, it opens the seam between the front and side of the seat’s trim cover. Each air bag deploys independently; a left side impact deploys the left air bag only and a right-side impact deploys the right air bag only.
Page 65
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 The system includes side impact sensors that are cali- WARNING! (Continued) brated to deploy the side air bags during impacts that • If your vehicle is equipped with SABIC air bags, require air bag occupant protection. do not have any accessory items installed which will alter the roof, including adding a sunroof to WARNING!
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Along with seat belts and pretensioners, Advanced Front Advanced Front Air Bags are designed to provide addi- Air Bags work with the knee bolsters to provide im- tional protection by supplementing the seat belts in proved protection for the driver and front passenger.
Page 67
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Because air bag sensors measure vehicle deceleration Also, the ORC turns on the Air Bag Warning over time, vehicle speed and damage by themselves are Light in the instrument panel for approxi- not good indicators of whether or not an air bag should mately four to eight seconds for a self-check have deployed.
Page 68
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE are possible, based on the collision type and severity. The WARNING! steering wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as Ignoring the Air Bag Warning Light in your instru- the air bags inflate to their full size.
Page 69
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Based on the severity and type of collision, the side air A quantity of non-toxic gas is generated to inflate the side bag inflator on the crash side of the vehicle may be curtain air bag.
Page 70
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Accident Response System NOTE: Front and/or side air bags will not deploy in all In the event of an impact causing air bag deployment, if collisions. This does not mean something is wrong with the communication network remains intact, and the the air bag system.
Page 71
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 bag inflation. These airborne particles may irritate the Maintaining Your Air Bag System skin, eyes, nose, or throat. If you have skin or eye WARNING! irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air.
Page 72
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Air Bag Warning Light WARNING! (Continued) You will want to have the air bags ready to • Do not attempt to modify any part of your air bag inflate for your protection in a collision. The system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 • Whether or not the driver and passenger safety belts NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint were buckled/fastened; Controller (ORC) may also be disabled. The air bags may •...
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To read data recorded by an EDR, special equipment is WARNING! required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, In a collision, an unrestrained child, even a tiny baby, such as law enforcement, that have the special equip- can become a projectile inside the vehicle.
Page 75
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Infants And Child Restraints held in the vehicle by the lap/shoulder belt or the Safety experts recommend that children ride rearward- LATCH child restraint anchor system. Refer to “Lower facing in the vehicle until they are two years old or until Anchors and Tether for CHildren (LATCH)”.
Page 76
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE remain in a forward-facing child seat with a harness for WARNING! as long as possible, up to the highest weight or height • Improper installation can lead to failure of an allowed by the child seat. These child seats are also held in the vehicle by the lap/shoulder belt or the LATCH infant or child restraint.
Page 77
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 • Carefully follow the instructions that come with the Here are some tips on getting the most out of your child restraints: restraint. If you install the restraint improperly, it may not work when you need it. •...
Page 78
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE around, and insert the latch plate into the buckle Lower Anchors and Tether for CHildren (LATCH) again. If you still can’t make the child restraint secure, Your vehicle is equipped with the child restraint anchor- try a different seating position.
Page 79
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 the vehicle’s seat belts. Please refer to “Installing The LATCH-Compatible Child Restraint System” for typical installation instructions. Rear Seat LATCH Anchors Child restraints systems having attachments designed to connect to the lower anchorages are now available. Child restraints having tether straps and hooks for connection to the top tether anchorage, have been available for some time.
Page 80
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE have tether straps, and you are urged to take advantage Installing The LATCH-Compatible Child Restraint of all of the available attachments provided with your System child restraint in any vehicle. We urge you to carefully follow the directions of the manufacturer when installing your child restraint.
Page 81
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 window. These tether strap anchorages are under a provide the most direct path between the anchor and the plastic cover with this symbol on it. child restraint. Finally, tighten all three straps as you push the child restraint rearward and downward into the Many, but not all, restraint systems will be equipped with seat, removing slack in the straps according to the child...
Page 82
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the child restraint belt path and then buckle it. This should stow the seat belt out of the reach of an inquisitive child. Remind all children in the vehicle that the seat belts are not toys and should not be played with, and never leave your child unattended in the vehicle.
Page 83
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 between the two posts. If not possible, lower the head Installing Child Restraints Using The Vehicle Seat restraint and pass the tether strap around the outboard Belt side of the head restraint. The seat belts in the passenger seating positions are equipped with an Automatic Locking Retractor to secure 3.
Page 84
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • N/A — Not Applicable buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate from the • ALR — Automatic Locking Retractor buckle and twist the short buckle-end belt several times Installing a Child Restraint with an ALR: to shorten it.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 • The lap portion should be low on the hips and as snug ENGINE BREAK-IN RECOMMENDATIONS as possible. A long break-in period is not required for the engine and drivetrain (transmission and axle) in your vehicle. •...
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! WARNING! • Do not leave children or animals inside parked Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result. vehicles in hot weather. Interior heat build-up may cause serious injury or death.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 Exhaust Gas WARNING! (Continued) • If it is necessary to sit in a parked vehicle with the WARNING! engine running, adjust your heating or cooling Exhaust gases can injure or kill. They contain carbon controls to force outside air into the vehicle.
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE inspect the exhaust system each time the vehicle is raised authorized dealer. If the light stays on, flickers, or comes for lubrication or oil change. Replace as required. on while driving, have the system checked by an autho- rized dealer.
Page 89
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 WARNING! WARNING! (Continued) • Check mounting of mats on a regular basis. Al- Pedals that cannot move freely can cause loss of ways properly reinstall and secure floor mats that vehicle control and increase the risk of serious per- have been removed for cleaning.
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Periodic Safety Checks You Should Make Outside Lights The Vehicle Have someone observe the operation of exterior lights while you work the controls. Check turn signal and high Tires beam indicator lights on the instrument panel. Examine tires for excessive tread wear and uneven wear patterns.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors ......93 Uconnect™ Phone — If Equipped ... 97 Inside Day/Night Mirror .
Page 92
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Command — If Equipped ... 127 Head Restraints ..... 140 Voice Command System Operation .
Page 93
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 Fog Lights — If Equipped ....150 Electronic Speed Control — If Equipped ..159 Daytime Running Lights — If Equipped ..151 To Activate .
Page 94
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Security ......169 Ignition Off Operation ....173 Troubleshooting Tips .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Dimming Mirror — If Equipped CAUTION! This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or To avoid damage to the mirror during cleaning, never off by pressing the button at the base of the mirror.
Page 97
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 Power Mirror Control Mirror Directions To adjust a mirror, turn the control wand toward the left When you are finished adjusting the mirror, turn the or right mirror positions indicated. Tilt the control wand control to the center position to prevent accidentally in the direction you want the mirror to move.
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjusting Side View Mirrors Exterior Mirrors Folding Feature All exterior mirrors are hinged and may be moved either Outside Mirror — Driver Side forward or rearward to resist damage. The hinges have Adjust the outside mirror to center on the adjacent lane of three detent positions: full forward, full rearward and traffic, with a slight overlap of the view obtained on the normal.
0.96 or higher. See the Uconnect™ website for supported phones. For Uconnect™ customer support, visit the following websites: • www.chrysler.com/uconnect • www.dodge.com/uconnect Illuminated Vanity Mirror Uconnect™ Phone — IF EQUIPPED • www.jeep.com/uconnect Uconnect™ Phone is a voice-activated, hands-free, in- •...
Page 100
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect™ Phone allows you to transfer calls between WARNING! the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system’s Any voice commanded system should be used only microphone for private conversation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 Voice Command Button Operation Actual button location may vary with the ra- Voice commands can be used to operate the Uconnect™ dio. The individual buttons are described in the Phone and to navigate through the Uconnect™ Phone “Operation”...
Page 102
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE example, you can use the compound form voice Cancel Command command “Phonebook New Entry”, or you can break At any prompt, after the beep, you can say “Cancel” and the compound form command into two voice com- you will be returned to the main menu.
Page 103
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 • When prompted, after the beep, say “Pair a Device” phone to use if multiple mobile phones are in the and follow the audible prompts. vehicle at the same time. For example, if priority three and priority five phones are present in the vehicle, the •...
Page 104
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Uconnect™ Phone will confirm the phone number • The Uconnect™ system will confirm the name and and then dial. The number will appear in the display then dial the corresponding phone number, which of certain radios.
Page 105
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 • When prompted, enter the number designation (e.g., Phonebook Download – Automatic Phonebook “Home”, “Work”, “Mobile”, or “Other”). This will Transfer From Mobile Phone allow you to store multiple numbers for each phone- If equipped and specifically supported by your phone, book entry, if desired.
Page 106
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Depending on the maximum number of entries down- Edit Uconnect™ Phonebook Entries loaded, there may be a short delay before the latest NOTE: downloaded names can be used. Until then, if avail- •...
Page 107
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 • After you enter the Phonebook Delete menu, you will After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in then be asked for the name of the entry that you wish the phonebook, call the number you just edited, or return to delete.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the “Ready” prompt and the following beep, say Delete/Erase “All” Uconnect™ Phonebook Entries “Phonebook List Names”. • Press the button to begin. • The Uconnect™ Phone will play the names of all the •...
Page 109
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 mobile service plan. For example, if your mobile service mobile phone. Press the button to place the current plan provides three-way calling, this feature can be call on hold and answer the incoming call. accessed through the Uconnect™...
Page 110
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Place/Retrieve A Call From Hold Three-Way Calling To put a call on hold, press the button until you hear To initiate three-way calling, press the button while a single beep. This indicates that the call is on hold. To a call is in progress, and make a second phone call, as bring the call back from hold, press and hold the described under “Making a Second Call While Current...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 • After the “Ready” prompt and the following beep, say • After the ignition key is switched to OFF, a call can “Redial”. continue on the Uconnect™ Phone for a certain dura- tion, after which the call is automatically transferred •...
Page 112
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the “Ready” prompt and the following beep, say After selecting one of the languages, all prompts and voice commands will be in that language. “Emergency” and the Uconnect™ Phone will instruct the paired mobile phone to call the emergency num- NOTE: After every Uconnect™...
Page 113
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Mexico City in Mexico). Please refer to the 24-Hour WARNING! “Towing Assistance” coverage details on the DVD in the Warranty Information Booklet and the 24-Hour To use your Uconnect™ Phone System in an emer- Towing Assistance references.
Page 114
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Working With Automated Systems is also to be used for navigating through an automated This method is used in instances where one generally has customer service center menu structure, and to leave a to press numbers on the mobile phone keypad while number on a pager.
Page 115
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Barge In — Overriding Prompts Phone And Network Status Indicators The “Voice Command” button can be used when you If available on the radio and/or on a premium display wish to skip part of a prompt and issue your voice such as the instrument panel cluster, and supported by command immediately.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Certain brands of mobile phones do not send the Advanced Phone Connectivity dial ring to the Uconnect™ Phone to play it on the vehicle Transfer Call To And From Mobile Phone audio system, so you will not hear it. Under this situa- The Uconnect™...
Page 117
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 • After the “Ready” prompt and the following beep, say List Paired Mobile Phone Names “Setup Select Phone” and follow the prompts. • Press the button to begin. • You can also press the button at any time while the •...
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • You can also press the • Press the button at any time while the button and say the “Voice Training, list is being played, and then choose the phone you System Training, or Start Voice Training” command. wish to delete.
Page 119
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 • low-to-medium vehicle speed, This will delete all phone pairing, phone book entries, and other settings in all language modes. The System will • low road noise, prompt you before resetting to factory settings. •...
Page 120
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Phonebook (Downloaded and Uconnect™ Phone Lo- • low road noise, cal) name recognition rate is optimized when the • smooth road surface, entries are not similar. • fully closed windows, • Numbers must be spoken in single digits. “800” must •...
Page 121
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 Recent Calls After reading a message, you can “Reply” or “Forward” If your phone supports “Automatic Phonebook Down- the message using Uconnect™ Phone. load”, Uconnect™ Phone can list your Outgoing, Incom- Send Messages: ing and Missed Calls.
Page 122
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE List of Preset Messages: 11. See You in 15 minutes 1. Yes 12. I am on my way 2. No 13. I’ll be late 3. Where are you? 14. Are you there yet? 4.
Page 123
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 Turn SMS Incoming Announcement ON/OFF Bluetooth Communication Link Turning the SMS Incoming Announcement OFF will stop Mobile phones have been found to lose connection to the the system from announcing the new incoming mes- Uconnect™...
Page 124
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 125
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123...
Page 126
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 127
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) zero call cancel confirmation prompts three continue four delete five dial download seven edit eight emergency nine English star (*) erase all plus (+) Espanol pound (#) Francais add location...
Page 128
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) language return to main menu return or main menu list names select phone select list phones send mobile set up phone settings or phone set up mute towing assistance mute off...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 General Information NOTE: Take care to speak into the Voice Interface This device complies with Part 15 of the FCC rules and System as calmly and normally as possible. The ability of RSS 210 of Industry Canada. Operation is subject to the the Voice Interface System to recognize user voice com- following conditions: mands may be negatively affected by rapid speaking or a...
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you ever wish to interrupt the system while it lists The system will best recognize your speech if the win- options, press the Voice Command button, listen dows are closed, and the heater/air conditioning fan is for the beep, and say your command.
Page 131
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 3. Use the ON/OFF VOLUME rotary knob to adjust the Radio AM volume to a comfortable level while the Voice Command To switch to the AM band, say “AM” or “Radio AM”. In system is speaking.
Page 132
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Menu Radio” (to switch to the radio menu) Disc To switch to the disc mode, say “Disc”. In this mode, you • “Main Menu” (to switch to the main menu) may say the following commands: Satellite Radio •...
Page 133
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 • “Switch to system setup” − “Continue” (to continue recording) • “Change to setup” − “Delete” (to delete the recording) • “Play Memos” (to play previously recorded memos) • “Main menu setup” or —...
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Training WARNING! For users experiencing difficulty with the system recog- • It is dangerous to ride in a cargo area, inside or nizing their voice commands or numbers the Uconnect™ Voice “Voice Training” feature may be used. outside of a vehicle.
Page 135
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Adjusting The Seat Forward Or Rearward The seat can be adjusted both forward and rearward. Push the seat switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position is reached.
Page 136
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reclining The Seatback WARNING! (Continued) The angle of the seatback can be adjusted forward or • Do not ride with the seatback reclined so that the backward. Push the seatback switch forward or rear- shoulder belt is no longer resting against your ward, the seat will move in the direction of the switch.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Heated Seats — If Equipped Press the switch once to select HIGH-level There are two heated seat switches that allow the driver heating. Press the switch a second time to select and passenger to operate the seats independently. The LOW-level heating.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Front Seat Adjustments WARNING! The adjusting bar is located at the front of the seats, near • Persons who are unable to feel pain to the skin the floor. Pull the bar upward to move the seat to the desired position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reclining Seats WARNING! The recliner control is on the side of the seat. To recline, • Adjusting a seat while the vehicle is moving is lean forward slightly before lifting the lever, then lean back to the desired position and release the lever.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 Lumbar Support — If Equipped Fold-Flat Front Passenger Seat This feature allows you to increase or decrease the The recline handle on the front passenger seat also amount of lumbar support. The control lever is located releases the seatback to fold forward.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The hard seatback features a work surface and a molded Head Restraints rim for retaining items stored on the seatback panel. Head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rear impact.
Page 143
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Active Head Restraints — Front Seats To raise the head restraint, pull upward on the head Active Head Restraints are passive, deployable compo- restraint. To lower the head restraint, press the push nents, and vehicles with this equipment cannot be readily button, located at the base of the head restraint, and push identified by any markings, only through visual inspec- downward on the head restraint.
Page 144
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For comfort the Active Head Restraints can be tilted forward and rearward. To tilt the head restraint closer to the back of your head, pull forward on the bottom of the head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head.
Page 145
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 • In the event of deployment of an Active Head Re- WARNING! (Continued) straint, refer to “Occupant Restraints/Resetting Active • Active Head Restraints may be deployed if they Head Restraints (AHR)” in “Things to Know Before are struck by an object such as a hand, foot or loose Starting Your Vehicle”...
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Folding Rear Seat WARNING! To provide additional storage area, the rear seatback can • Be certain that the seatback is securely locked into be folded forward. Pull on the loops shown in the picture to fold down either or both seatbacks.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 Folding Rear Seat Center Armrest TO OPEN AND CLOSE THE HOOD The rear seat is equipped with a folding armrest with To open the hood, two latches must be released. cupholders. 1. Pull the hood release lever located under the left side of the instrument panel.
Page 148
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Lift the secondary latch located under the front edge of the hood, near the center and raise the hood. Hood Prop Rod Hole Location Before closing the hood, make sure to stow the prop rod in its proper location.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 passing light, fog lights, instrument panel light dimming CAUTION! and turn signals. The multifunction lever is located on the left side of the steering column. To prevent possible damage, do not slam the hood to close it.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights And Parking Lights Automatic Headlights — If Equipped Turn the end of the multifunction lever to the first detent Turning the end of the multifunction lever to the third for parking light operation. Turn to the second detent for detent (AUTO), will activate the automatic headlight headlight operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 With the engine running and the multifunction lever in the AUTO position, the headlights will turn on and turn off based on the surrounding light levels. Headlight Time Delay There is also a feature that delays turning off the vehicle lights for 30, 60 or 90 seconds after the ignition switch is turned OFF.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lane Change Assist Fog Lights — If Equipped Tap the lever up or down once, without moving beyond The front fog light switch is on the multifunction the detent, and the turn signal (right or left) will flash lever.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 NOTE: The front fog lights will only operate with the Lights On Reminder headlights on low beam. Selecting high beam headlights If the headlights or parking lights are on after the ignition will turn off the front fog lights. is turned OFF, a chime will sound to alert the driver when the driver’s door is opened.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rotate the center portion of the lever upward to the last Map/Reading/Interior Lights detent to turn on the interior lighting. These lights are mounted between the sun visors above the rearview mirror. Each light can be turned on by pressing the barrel.
Page 155
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 There is a second light located midway back in the headliner. To protect the battery, the interior lights will turn off automatically 10 minutes after the ignition switch is moved to the LOCK position. This will occur if the interior lights were switched on manually or are on because a door is open.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS Rotate the end of the lever to the LO position for The wipers and washers are operated by a switch low-speed wiper operation, or to the HI position for on the control lever.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 are operating. The wipers will resume operation when then turn the end of the lever to select the desired delay you turn the ignition switch to the ON position again. interval. There are five delay settings, which allow you to regulate the wipe interval from a minimum of one cycle CAUTION! every second to a maximum of approximately 18 seconds...
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The wiper delay times depend on vehicle speed. WARNING! If the vehicle is moving less than 10 mph (16 km/h), delay times will be doubled. Sudden loss of visibility through the windshield could lead to a collision.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 Headlights With Wipers Feature (Available With Automatic Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the multifunction lever (on the left side of the steering column) is placed in the AUTO position.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT/TELESCOPING STEERING COLUMN To unlock the steering column, pull the control handle This feature allows you to tilt the steering column outward. To tilt the steering column, move the steering upward or downward. It also allows you to lengthen or wheel upward or downward as desired.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h). The Electronic Speed Control buttons are located on the right side of the steering wheel.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE System can be reactivated by pushing the Electronic To Set A Desired Speed Speed Control ON/OFF button and resetting the desired Turn the Electronic Speed Control ON. When the vehicle vehicle set speed. has reached the desired speed, press the SET (-) button and release.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 To Resume Speed decrease until the button is released. Release the button To resume a previously set speed, push the RES (+) when the desired speed is reached, and the new set speed button and release.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE On steep hills, a greater speed loss or gain may occur so The HomeLink buttons, located on either the overhead it may be preferable to drive without Electronic Speed console, headliner or sunvisor, designate the three differ- Control.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 Before You Begin Programming HomeLink Be sure that your vehicle is parked outside of the garage before you begin programming. For more efficient programming and accurate transmis- sion of the radio-frequency signal it is recommended that a new battery be placed in the hand-held transmitter of the device that is being programmed to the HomeLink system.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If you have any problems, or require assistance, please call toll-free 1–800–355–3515 or, on the Internet at www.HomeLink.com for information or assistance. Programming A Rolling Code For programming garage door openers that were manu- factured after 1995.
Page 167
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 3. Simultaneously press and hold both the Homelink NOTE: You have 30 seconds in which to initiate the next button you want to program and the hand-held transmit- step after the LEARN button has been pressed. ter button.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Press and hold the desired HomeLink button until 4. Continue to hold both buttons and observe the indi- the indicator light begins to flash after 20 seconds. Do not cator light. The Homelink indicator will flash slowly and then rapidly after Homelink has received the fre- release the button.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 Reprogramming A Single HomeLink Button to pick up the signal during programming. Similar to this To reprogram a channel that has been previously trained, Canadian law, some U.S. gate operators are designed to follow these steps: time-out in the same manner.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Watch for the HomeLink indicator to change flash Reprogramming A Single HomeLink Button rates. When it changes, it is programmed. It may take up To reprogram a channel that has been previously trained, to 30 seconds or longer in rare cases.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 Security Troubleshooting Tips It is advised to erase all channels before you sell or turn If you are having trouble programming HomeLink , here in your vehicle. are some of the most common solutions: •...
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information WARNING! This device complies with FCC rules Part 15 and Industry • Your motorized door or gate will open and close Canada RSS-210. Operation is subject to the following two conditions: while you are programming the universal trans- ceiver.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 POWER SUNROOF — IF EQUIPPED WARNING! The sunroof controls are mounted between the dome/ • Never leave children in a vehicle with the key in reading lights. the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Express position. The sunroof will close fully and stop automati- Press the switch rearward and release it within one-half cally. This is called “Express Close”. During Express second and the sunroof will open automatically from any Close operation, any movement of the switch will stop position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 NOTE: Pinch protection is disabled while the switch is windows down, or the sunroof (if so equipped) is in pressed. certain open or partially open positions. This is a normal occurrence and can be minimized. If the buffeting occurs Venting Sunroof —...
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For vehicles equipped with the EVIC, the power sunroof switch will remain active for up to 10 minutes after the ignition switch is turned OFF. Opening either front door will cancel this feature. The time is programmable. Refer to “Electronic Vehicle Information Center (EVIC)/ Personal Settings (Customer-Programmable Features)”...
Page 177
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 The center console power outlet is powered directly from the battery (power available at all times). Items plugged into this power outlet may discharge the battery and/or prevent the engine from starting. NOTE: To ensure proper operation a MOPAR knob and element must be used.
Page 178
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced. •...
Page 179
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 WARNING! CAUTION! • Many accessories that can be plugged in draw To avoid serious injury or death: • Only devices designed for use in this type of power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.).
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CIGAR LIGHTER AND ASH RECEIVER — IF EQUIPPED An optional ash receiver is available from your autho- rized dealer and will fit in the center console front cupholder. The optional ash receiver also comes with a cigar lighter that can be used with the power outlets.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 STORAGE Glovebox Storage Compartment The glovebox storage compartment is located on the right side of the instrument panel. Rear Bottle Holder WARNING! If containers of hot liquid are placed in the bottle holder, they can spill when the door is closed, burn- Glovebox Storage Compartment ing the occupants.
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pull on the handle to open the glovebox. comfort. The center console can be used for storage and is also equipped with an electrical power outlet. Refer to “Power Outlets” in “Understanding The Feature of Your Vehicle”...
Page 183
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 NOTE: • A notch in the front of the console base allows for use of a cellular phone while it is plugged into the power outlet with the armrest latched down. • The power outlet can also energize the cigar lighter in the optional cup holder ash receiver.
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CARGO AREA FEATURES WARNING! (Continued) The 60/40 split-folding rear seat provides cargo-carrying • The cargo area in the rear of the vehicle (with the versatility. The seatbacks fold down easily by pulling rear seatbacks in the locked-up or folded down nylon tabs between the seatbacks and the bolsters.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 Always place cargo evenly on the cargo floor. Put heavier objects as low and as far forward as possible. Place as much cargo as possible in front of the rear axle. Too much weight or improperly placed weight over or behind the rear axle can cause the rear of the vehicle to sway.
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES CAUTION! Rear Window Defroster Failure to follow these cautions can cause damage to The rear window defroster button is located on the the heating elements: climate control (Mode) knob. Press this button to •...
Page 187
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS Instrument Panel Features ....189 Oil Change Required — If Equipped ..210 Instrument Cluster ....190 EVIC Main Menu .
Page 188
186 UNDERSTANDING YOUR INSTRUMENT PANEL Personal Settings Media Center 730N/430/430N (RHR/RER/ (Customer-Programmable Features) ..216 RBZ/RHB) CD/DVD/HDD/NAV — If Equipped ......238 Media Center 230 (REQ) —...
Page 189
UNDERSTANDING YOUR INSTRUMENT PANEL 187 Media Center 130 With Satellite Radio Controlling The iPod Or External USB (Sales Code RES+RSC)....247 Device Using Radio Buttons ... . . 264 Operating Instructions —...
Page 190
188 UNDERSTANDING YOUR INSTRUMENT PANEL Climate Controls ..... . 272 Automatic Temperature Control (ATC) — If Equipped ......277 Manual Heating And Air Conditioning .
192 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS removes this heat. You can also turn the Temperature control to maximum heat, the Mode control to Floor and 1. Temperature Gauge the Fan control to High. This allows the heater core to act The temperature gauge shows engine coolant tempera- as a supplement to the radiator and aids in removing heat ture.
Page 195
UNDERSTANDING YOUR INSTRUMENT PANEL 193 5. Low Fuel Light If jump starting is required, refer to “Jump Starting When the fuel level drops to approximately 2.0 gal- Procedures” in “What To Do In Emergencies”. lons (7.6 Liters), the fuel symbol will light and a 7.
Page 196
194 UNDERSTANDING YOUR INSTRUMENT PANEL flash or remain on continuously. Refer to “Occupant 10. Engine Temperature Warning Light Restraints” in “Things To Know Before Starting Your This light warns of an overheated engine condi- Vehicle” for further information. tion. As engine coolant temperatures rise and the gauge approaches H , this indicator will illuminate 9.
Page 197
UNDERSTANDING YOUR INSTRUMENT PANEL 195 11. Brake Warning Light If brake failure is indicated, immediate repair is neces- This light monitors various brake functions, sary. including brake fluid level and parking brake WARNING! application. If the brake light turns on it may indicate that the parking brake is applied, that Driving a vehicle with the brake light on is danger- the brake fluid level is low, or that there is a problem with...
Page 198
196 UNDERSTANDING YOUR INSTRUMENT PANEL off unless the parking brake is applied or a brake fault is NOTE: You must apply the brakes before shifting from detected. If the light does not illuminate, have the light PARK. inspected by an authorized dealer. 14.
Page 199
UNDERSTANDING YOUR INSTRUMENT PANEL 197 The two trip odometers show individual trip mileage. To NOTE: If the instrument cluster is equipped with the switch from odometer to trip odometers, press and optional Electronic Vehicle Information Center (EVIC), release the Trip Odometer button. To reset a trip odom- then all warnings including ”Low Tire,”...
Page 200
198 UNDERSTANDING YOUR INSTRUMENT PANEL gASCAP means the engine oil change interval may fluctuate If the vehicle diagnostic system detects a leak or change dependent upon your personal driving style. in the evaporative system, or the fuel filler cap is loose, Unless reset, this message will continue to display each improperly installed, or damaged, the words “gASCAP”...
Page 201
UNDERSTANDING YOUR INSTRUMENT PANEL 199 4. For vehicles equipped with the Electronic Vehicle 17. Electronic Throttle Control (ETC) Indicator Light Information Center (EVIC), refer to “Electronic Vehicle This light informs you of a problem with the Information Center (EVIC)”. Electronic Throttle Control (ETC) system. If a problem is detected, the light will come on 15.
200 UNDERSTANDING YOUR INSTRUMENT PANEL 18. Park/Headlight ON Indicator — If Equipped 21. Vehicle Security Light — If Equipped This indicator will illuminate when the park This light will flash rapidly for approximately lights or headlights are turned on. 16 seconds when the alarm system is arming. The light will begin to flash slowly indicating that the system is armed.
Page 203
UNDERSTANDING YOUR INSTRUMENT PANEL 201 (kilometers) at speeds greater than 30 mph (48 km/h), see 24. Tire Pressure Monitoring Telltale Light your authorized dealer as soon as possible to have the Each tire, including the spare (if provided), problem diagnosed and corrected. should be checked monthly when cold and inflated to the inflation pressure recommended NOTE:...
Page 204
202 UNDERSTANDING YOUR INSTRUMENT PANEL reduces fuel efficiency and tire tread life, and may affect alternate tires or wheels on the vehicle that prevent the the vehicle’s handling and stopping ability. TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more Please note that the TPMS is not a substitute for proper tires or wheels on your vehicle, to ensure that the tire maintenance, and it is the driver’s responsibility to...
Page 205
UNDERSTANDING YOUR INSTRUMENT PANEL 203 25. Malfunction Indicator Light (MIL) CAUTION! The Malfunction Indicator Light (MIL) is part of an onboard diagnostic system called OBD that Prolonged driving with the MIL on could cause monitors emissions, engine, and automatic trans- damage to the engine control system.
Page 206
204 UNDERSTANDING YOUR INSTRUMENT PANEL 26. Anti-Lock Brake (ABS) Light — If Equipped should come on. If the light does not come on, have the This light monitors the ABS. This light will system inspected by an authorized dealer. come on when the ignition key is turned to the 27.
UNDERSTANDING YOUR INSTRUMENT PANEL 205 MINI-TRIP COMPUTER — IF EQUIPPED WARNING! The Mini-Trip Computer is located in the instrument cluster and features a driver-interactive trip information If the Transmission Temperature Warning Light is and temperature display. illuminated and you continue operating the vehicle, in some circumstances you could cause the fluid to NOTE: The system will display the last known outside boil over, come in contact with hot engine or exhaust...
206 UNDERSTANDING YOUR INSTRUMENT PANEL Control Buttons RESET Button To reset the display shown, turn the ignition switch to the ON position, then press and hold the RESET button located on the steering wheel. The following displays can be reset or changed: •...
UNDERSTANDING YOUR INSTRUMENT PANEL 207 ELECTRONIC VEHICLE INFORMATION CENTER The EVIC consists of the following: (EVIC) — IF EQUIPPED • Compass Heading Display (N, S, E, W, NE, NW, SE, The Electronic Vehicle Information Center (EVIC) fea- tures a driver-interactive display that is located in the •...
Page 210
208 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by Press and release the MENU button to advance pressing the following buttons mounted on the steering the display to each of the EVIC Main Menu wheel: features.
UNDERSTANDING YOUR INSTRUMENT PANEL 209 • Right Rear Turn Signal Lamp Out (with a single Press and release the SELECT Button to accept a selection. The SELECT Button also resets chime) various Trip Functions. • RKE (Remote Keyless Entry) Battery Low (with a SELECT single chime) Button...
210 UNDERSTANDING YOUR INSTRUMENT PANEL • Key In Ignition Oil Change Required — If Equipped Your vehicle is equipped with an engine oil change • Remote start aborted — Door ajar indicator system. The Oil Change Required message will • Remote start aborted — Hood ajar flash in the EVIC display for approximately five seconds after a single chime has sounded to indicate the next •...
UNDERSTANDING YOUR INSTRUMENT PANEL 211 • Tire Pressure Status display 2. Fully depress the accelerator pedal slowly three times within 10 seconds. • Elapsed Time 3. Turn the ignition switch to the LOCK position. • EVIC Units Selection NOTE: If the indicator message illuminates when you •...
212 UNDERSTANDING YOUR INSTRUMENT PANEL Compass Display EVIC will flash the “CAL” indicator until the compass is The compass heading indicates the direction calibrated. You may calibrate the compass by completing the vehicle is facing. Press and release the one or more 360–degree turns (in an area free from large compass button to display one of eight metal or metallic objects) until the CAL indicator in the compass headings, the outside temperature,...
Page 215
UNDERSTANDING YOUR INSTRUMENT PANEL 213 2. Press and release the MENU button until “Personal NOTE: Magnetic and battery powered devices, (such as Settings” displays in the EVIC. cell phones, iPod’s, radar detectors, PDA’s and laptops) should be kept away from the top of the instrument 3.
214 UNDERSTANDING YOUR INSTRUMENT PANEL To Change Compass Variance: Average Fuel Economy 1. Turn the ignition switch to the ON position. Leave the Shows the average fuel economy since the last reset. shift lever in PARK. Average Fuel Economy can be reset by pressing and holding the SELECT button (as prompted in the EVIC 2.
UNDERSTANDING YOUR INSTRUMENT PANEL 215 • If the Tire Pressure System requires service, Check When the DTE value is less than 30 miles (48 km) estimated driving distance, the DTE display will change TPM System is displayed. Tire PSI is an information to a text display of LOW FUEL”.
216 UNDERSTANDING YOUR INSTRUMENT PANEL EVIC Units Selection (UNITS IN Display) Personal Settings (Customer-Programmable Features) Displays the units used for the Outside Temperature, Personal Settings allows the driver to set and recall Average Fuel Economy, Distance to Empty and Tire features when the automatic transaxle is in PARK.
Page 219
UNDERSTANDING YOUR INSTRUMENT PANEL 217 Auto Unlock on Exit Sound Horn with Lock When ON is selected and the transaxle is in the PARK or When ON is selected, a short horn sound will occur when NEUTRAL position, all doors will unlock when the the RKE transmitter LOCK button is pressed.
Page 220
218 UNDERSTANDING YOUR INSTRUMENT PANEL Headlamps With Wipers Opening either front vehicle door will cancel this feature. (Available with Auto Headlights Only) To make your selection, press the SELECT button until When ON is selected, and the headlight switch is in the Off, 45 sec., 5 min., or 10 min.
UNDERSTANDING YOUR INSTRUMENT PANEL 219 MEDIA CENTER 230 (REQ) — AM/FM STEREO Operating Instructions - Radio Mode RADIO AND 6–DISC CD/DVD CHANGER NOTE: The ignition switch must be in the ON or ACC (MP3/WMA AUX JACK) position to operate the radio. NOTE: The radio sales code is located on the lower right Power Switch/Volume Control (Rotary) side of the radio faceplate.
Page 222
220 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons If your vehicle is not equipped with or this feature is not Press and release the SEEK buttons to search for the next available on your vehicle, a “Not Equipped With listenable station in AM/FM mode. Press the right switch Uconnect Phone”...
Page 223
UNDERSTANDING YOUR INSTRUMENT PANEL 221 Clock Setting Procedure INFO Button Press the INFO button for an RDS station (one with call 1. Press and hold the TIME button until the hours blink. letters displayed). The radio will return a Radio Text 2.
Page 224
222 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a second MUSIC TYPE Button time and MID will display. Turn the TUNE/SCROLL Pressing this button once will turn on the Music Type control knob to the right or left to increase or decrease the mode for five seconds.
Page 225
UNDERSTANDING YOUR INSTRUMENT PANEL 223 Program Type 16-Digit Character Display Program Type 16-Digit Character Display Information Inform Top 40 Top 40 Jazz Jazz Weather Weather News News By pressing the SEEK button when the Music Type icon Nostalgia Nostalga is displayed, the radio will be tuned to the next frequency Oldies Oldies station with the same selected Music Type name.
Page 226
224 UNDERSTANDING YOUR INSTRUMENT PANEL • DVD Enter - When the disc is in DVD Menu mode, • Angle – Repeatedly pressing SELECT will change selecting DVD Enter will allow you to play the current the viewing angle if supported by the DVD disc (if highlighted selection.
Page 227
UNDERSTANDING YOUR INSTRUMENT PANEL 225 • Set Home Clock - Pressing the SELECT button allows Audio Language — If Equipped you to set the clock. Turn the TUNE/SCROLL control Selecting this item allows you to choose a default audio knob to adjust the hours and then press and turn the language (effective only if the language is supported by TUNE/SCROLL control knob to adjust the minutes.
Page 228
226 UNDERSTANDING YOUR INSTRUMENT PANEL Audio DRC — If Equipped NOTE: The user will have to set these defaults before Selecting this item allows you to limit maximum audio loading a disc. If changes are made to these settings after dynamic range.
UNDERSTANDING YOUR INSTRUMENT PANEL 227 You may add a second station to each pushbutton by Operation Instructions - (DISC MODE for CD and repeating the above procedure with this exception: Press MP3/WMA Audio Play, DVD-VIDEO) the SET button twice and SET 2 will show in the display The radio DVD player and many DVD discs are coded by window.
Page 230
228 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The ignition switch must be in the ON or ACC Eject Button — Ejecting Compact Disc(s) position to operate the radio. Press the EJECT button and the pushbutton with the corresponding number (1-6) where the LOAD Button —...
UNDERSTANDING YOUR INSTRUMENT PANEL 229 SCAN Button (CD MODE) Notes On Playing MP3/WMA Files Press the SCAN button to scan through each track on the The radio can play MP3/WMA files; however, acceptable CD currently playing. MP3/WMA file recording media and formats are limited. When writing MP3/WMA files, pay attention to the TIME Button (CD MODE) following restrictions.
Page 232
230 UNDERSTANDING YOUR INSTRUMENT PANEL The radio uses the following limits for file systems: If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ • Maximum number of directory levels: 8 WMA tracks on that disc.
Page 233
UNDERSTANDING YOUR INSTRUMENT PANEL 231 Playback of MP3/WMA Files MPEG Sampling Fre- Bit Rate (kbps) When a medium containing MP3/WMA data is loaded, Specification quency (kHz) the radio checks all files on the medium. If the medium 320, 256, 224, contains a lot of folders or files, the radio will take more MPEG-1 Audio 192, 160, 128,...
232 UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button (DISC Mode for MP3/WMA Play) Press and hold the INFO button again for three seconds Pressing the LIST button will bring up a list of all folders to return to elapsed time display. on the disc.
Page 235
UNDERSTANDING YOUR INSTRUMENT PANEL 233 SCAN Button (Auxiliary Mode) Operating Instructions — Voice Command System No function. (If Equipped) For the radio, Refer to “Voice Command” in the EJECT Button (Auxiliary Mode) Uconnect™ User Manual located on the DVD for further No function.
234 UNDERSTANDING YOUR INSTRUMENT PANEL Macrovision NOTE: Sirius service is not available in Hawaii and has This product incorporates copyright protection technol- limited coverage in Alaska. ogy that is protected by U.S. patents and other intellec- System Activation tual property rights. Use of this copyright protection Sirius Satellite Radio service is pre-activated, and you technology must be authorized by Macrovision, and is may begin listening immediately to the one year of audio...
Page 237
UNDERSTANDING YOUR INSTRUMENT PANEL 235 2. Your Vehicle Identification Number. placed within the line of sight of the antenna will cause decreased performance. Larger luggage items such as To access the ESN/SID, refer to the following steps: bikes should be placed as far rearward as possible, within ESN/SID Access the loading design of the rack.
Page 238
236 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Uconnect™ Multimedia INFO Button (Satellite) Mode Pressing the INFO button will cycle the display informa- tion between Artist, Song Title, and Composer (if avail- NOTE: The ignition switch must be in the ON/RUN or able).
Page 239
UNDERSTANDING YOUR INSTRUMENT PANEL 237 or turning the TUNE/SCROLL control knob within five SET Button – To Set the Pushbutton Memory seconds will allow the program format type to be selected. When you are receiving a channel that you wish to commit to pushbutton memory, press the SET button.
238 UNDERSTANDING YOUR INSTRUMENT PANEL Buttons 1 - 6 MEDIA CENTER 130 (SALES CODE RES) These buttons tune the radio to the channels that you NOTE: The radio sales code is located on the lower right commit to pushbutton memory (12 Satellite stations). side of the radio faceplate.
UNDERSTANDING YOUR INSTRUMENT PANEL 239 Operating Instructions — Radio Mode SEEK Buttons Press and release the SEEK buttons to search for the next NOTE: The ignition switch must be in the ON or ACC listenable station in AM/FM mode. Press the right switch position to operate the radio.
Page 242
240 UNDERSTANDING YOUR INSTRUMENT PANEL 4. Adjust the minutes using the right side TUNE/ Push the rotary TUNE/SCROLL control knob a second SCROLL control knob. Press the TUNE/SCROLL control time and MID will display. Turn the TUNE/SCROLL knob to save time change. control knob to the right or left to increase or decrease the mid-range tones.
Page 243
UNDERSTANDING YOUR INSTRUMENT PANEL 241 Push the rotary TUNE/SCROLL control knob again to You may add a second station to each pushbutton by exit setting tone, balance, and fade. repeating the above procedure with this exception: Press the SET/RND button twice and SET 2 will show in the AM/FM Button display window.
242 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions — CD MODE For CD And If you insert a disc with the ignition ON and the radio MP3 Audio Play ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and •...
Page 245
UNDERSTANDING YOUR INSTRUMENT PANEL 243 If you have ejected a disc and have not removed it within RW/FF 10 seconds, it will be reloaded. If the CD is not removed, Press and hold the FF (Fast Forward) button and the CD the radio will reinsert the CD but will not play it.
244 UNDERSTANDING YOUR INSTRUMENT PANEL • Maximum number of files: 255 Notes on Playing MP3 Files The radio can play MP3 files; however, acceptable MP3 • Maximum number of folders. (The radio display of file file recording media and formats are limited. When names and folder names is limited.
Page 247
UNDERSTANDING YOUR INSTRUMENT PANEL 245 Discs created with an option such as keep disc open after MPEG Sampling Fre- Bit Rate (kbps) writing are most likely multisession discs. The use of Specification quency (kHz) multisession for CD audio or MP3 playback may result in 320, 256, 224, longer disc loading times.
246 UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3 Files Operation Instructions - Auxiliary Mode When a medium containing MP3 data is loaded, the The auxiliary (AUX) jack is an audio input jack, which radio checks all files on the medium. If the medium allows the user to plug in a portable device, such as an contains a lot of folders or files, the radio will take more MP3 player, or cassette player, and utilize the vehicle’s...
UNDERSTANDING YOUR INSTRUMENT PANEL 247 MEDIA CENTER 130 WITH SATELLITE RADIO Operating Instructions — Radio Mode (SALES CODE RES+RSC) NOTE: The ignition switch must be in the ON or ACC NOTE: The radio sales code is located on the lower right position to operate the radio.
Page 250
248 UNDERSTANDING YOUR INSTRUMENT PANEL to seek up and the left switch to seek down. The radio Phone Button Uconnect™ Phone — If Equipped will remain tuned to the new station until you make Press this button to operate the Uconnect™ Phone feature another selection.
Page 251
UNDERSTANDING YOUR INSTRUMENT PANEL 249 3. After adjusting the hours, press the right side TUNE/ INFO Button SCROLL control knob to set the minutes. The minutes Press the INFO button for an RDS station (one with call will begin to blink. letters displayed).
Page 252
250 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a second MUSIC TYPE Button time and MID will display. Turn the TUNE/SCROLL Pressing this button once will turn on the Music Type control knob to the right or left to increase or decrease the mode for five seconds.
Page 253
UNDERSTANDING YOUR INSTRUMENT PANEL 251 Program Type 16-Digit Character Display Program Type 16-Digit Character Display Information Inform Top 40 Top 40 Jazz Jazz Weather Weather News News By pressing the SEEK button when the Music Type icon Nostalgia Nostalga is displayed, the radio will be tuned to the next frequency Oldies Oldies station with the same selected Music Type name.
Page 254
252 UNDERSTANDING YOUR INSTRUMENT PANEL hours, press the TUNE/SCROLL control knob to set You may add a second station to each pushbutton by the minutes. The minutes will begin to blink. Adjust repeating the above procedure with this exception: Press the minutes using the right side TUNE/SCROLL the SET/RND button twice and SET 2 will show in the control knob.
UNDERSTANDING YOUR INSTRUMENT PANEL 253 Operation Instructions — CD MODE for CD and If you insert a disc with the ignition ON and the radio MP3 Audio Play ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and •...
Page 256
254 UNDERSTANDING YOUR INSTRUMENT PANEL If you have ejected a disc and have not removed it within RW/FF 10 seconds, it will be reloaded. If the CD is not removed, Press and hold FF (Fast Forward) and the CD player will the radio will reinsert the CD but will not play it.
UNDERSTANDING YOUR INSTRUMENT PANEL 255 • Maximum number of files: 255 Notes On Playing MP3 Files The radio can play MP3 files; however, acceptable MP3 • Maximum number of folders. (The radio display of file file recording media and formats are limited. When names and folder names is limited.
Page 258
256 UNDERSTANDING YOUR INSTRUMENT PANEL Discs created with an option such as keep disc open after MPEG Sampling Fre- Bit Rate (kbps) writing are most likely multisession discs. The use of Specification quency (kHz) multisession for CD audio or MP3 playback may result in 320, 256, 224, longer disc loading times.
UNDERSTANDING YOUR INSTRUMENT PANEL 257 Playback of MP3 Files LIST Button (CD Mode for MP3 Play) When a medium containing MP3 data is loaded, the Pressing the LIST button will bring up a list of all folders radio checks all files on the medium. If the medium on the disc.
258 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the INFO button again for three seconds TIME Button (Auxiliary Mode) to return to elapsed time display. Press this button to change the display to time of day. The time of day will display for five seconds (when the Operation Instructions - Auxiliary Mode ignition is OFF).
Page 261
UNDERSTANDING YOUR INSTRUMENT PANEL 259 radio system in your vehicle. Sirius will supply a wel- using the TUNE/SCROLL control knob until Sirius ID is come kit that contains general information, including selected. Press the TUNE/SCROLL control knob and the how to setup your on-line listening account. For further Sirius ID number will display.
Page 262
260 UNDERSTANDING YOUR INSTRUMENT PANEL Reception Quality SEEK Buttons Satellite reception may be interrupted due to one of the Press and release the SEEK buttons to search for the next following reasons: channel in Satellite mode. Press the right switch to seek up and the left switch to seek down.
Page 263
UNDERSTANDING YOUR INSTRUMENT PANEL 261 additional three seconds will make the radio display the Toggle the MUSIC TYPE button again to select the music Song Title all of the time (press and hold again to return type. to normal display). By pressing the SEEK button when the Music Type RW/FF function is active, the radio will be tuned to the next...
262 UNDERSTANDING YOUR INSTRUMENT PANEL SET Button – To Set the Pushbutton Memory Buttons 1 - 6 When you are receiving a channel that you wish to These buttons tune the radio to the channels that you commit to pushbutton memory, press the SET button. commit to pushbutton memory (12 Satellite stations).
UNDERSTANDING YOUR INSTRUMENT PANEL 263 This feature allows an iPod or external USB device to be Connecting The iPod Or External USB Device plugged into the USB port, located in the center of the Use the connection cable to connect an iPod or external instrument panel below the climate controls.
264 UNDERSTANDING YOUR INSTRUMENT PANEL • The audio device can be controlled using the radio Once the audio device is connected and synchronized to the vehicle’s iPod /USB/MP3 control system (iPod or buttons to Play, Browse, and List the iPod contents. external USB device may take a few minutes to connect), •...
UNDERSTANDING YOUR INSTRUMENT PANEL 265 • Jump backward in the current track by pressing and Play Mode When switched to iPod /USB/MP3 control mode, the holding the << RW button. Holding the << RW iPod or external USB device automatically starts Play button long enough will jump to the beginning of mode.
266 UNDERSTANDING YOUR INSTRUMENT PANEL • While a track is playing, press the INFO button to see • RND button (available on sales code RES radio only): the associated metadata (artist, track title, album, etc.) Pressing this button toggles between Shuffle ON and for that track.
Page 269
UNDERSTANDING YOUR INSTRUMENT PANEL 267 • Preset 5 – Audiobooks press the TUNE control knob to select and start playing the track. Turning the TUNE control knob • Preset 6 – Podcasts fast will scroll through the list faster. During fast •...
268 UNDERSTANDING YOUR INSTRUMENT PANEL • MUSIC TYPE button: The MUSIC TYPE button is WARNING! another shortcut button to the genre listing on your audio device. Do not plug in or remove the iPod or external USB device while driving. Failure to follow this warning CAUTION! could result in an accident.
Page 271
UNDERSTANDING YOUR INSTRUMENT PANEL 269 Play Mode Next Track When switched to BTSA mode, some audio devices can Use the SEEK UP button, or press the VR button on the start playing music over the vehicle’s audio system, but radio and say “Next Track” to jump to the next track some devices require the music to be initiated on the music on your cellular phone.
270 UNDERSTANDING YOUR INSTRUMENT PANEL Browse Browsing is not available on a BTSA device. Only the current song that is playing will display info. STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel.
UNDERSTANDING YOUR INSTRUMENT PANEL 271 Right-Hand Switch Functions Left-Hand Switch Functions For Media (i.e., CD) Operation • Press the top of the switch to increase the volume. • Press the top of the switch once to listen to the next •...
272 UNDERSTANDING YOUR INSTRUMENT PANEL CD/DVD DISC MAINTENANCE NOTE: If you experience difficulty in playing a particu- To keep a CD/DVD in good condition, take the following lar disc, it may be damaged (i.e., scratched, reflective precautions: coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding.
UNDERSTANDING YOUR INSTRUMENT PANEL 273 Manual Heating And Air Conditioning Blower Control Rotate this control to regulate the amount of air forced through the ven- tilation system in any mode. The blower speed increases as you move the control to the right from the “O” (OFF) position.
Page 276
274 UNDERSTANDING YOUR INSTRUMENT PANEL Temperature Control Mode Control (Air Direction) Rotate this control to regulate the tem- Rotate this control to choose from sev- perature of the air inside the passenger eral patterns of air distribution. You compartment. Rotating the dial left can select either a primary mode as into the blue area of the scale indicates identified by the symbols on the con-...
Page 277
UNDERSTANDING YOUR INSTRUMENT PANEL 275 NOTE: For all settings, except full cold or full hot, there Defrost is a difference in temperature between the upper and Air is directed through the windshield and side lower outlets. The warmer air flows to the floor outlets. window demist outlets.
Page 278
276 UNDERSTANDING YOUR INSTRUMENT PANEL • When the ignition switch is turned to the LOCK NOTE: • Continuous use of the Recirculation mode may make position, the recirculation feature will be cancelled. the inside air stuffy and window fogging may occur. Air Conditioning Control Extended use of this mode is not recommended.
UNDERSTANDING YOUR INSTRUMENT PANEL 277 • ECONOMY MODE Automatic Operation If economy mode is desired, press the A/C button to turn The Automatic Temperature Control system automati- OFF the indicator light and the A/C compressor. Then, cally maintains the climate in the cabin of the vehicle at move the temperature control to the desired temperature.
Page 280
278 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Dial in the temperature you would 72°F (22°C) is the recommended setting for maximum like the system to maintain by rotating comfort for the average person; however, this may vary. the Temperature Control knob. Once NOTE: the comfort level is selected, the sys- •...
Page 281
UNDERSTANDING YOUR INSTRUMENT PANEL 279 • If your air conditioning performance seems lower than Manual Operation expected, check the front of the A/C condenser located This system offers a full complement of manual override in front of the radiator for an accumulation of dirt or features, which consist of Blower Preferred Automatic, insects.
Page 282
280 UNDERSTANDING YOUR INSTRUMENT PANEL...
Page 283
UNDERSTANDING YOUR INSTRUMENT PANEL 281 • Floor The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and side window demist outlets.
Page 284
282 UNDERSTANDING YOUR INSTRUMENT PANEL • Air Conditioner Control NOTE: • When the ignition switch is turned to the LOCK Press this button to turn on the air conditioning during manual operation position, the recirculation feature will be cancelled. only. When the air conditioning is •...
UNDERSTANDING YOUR INSTRUMENT PANEL 283 • Most of the time, when in Automatic Operation, you Summer Operation can temporarily put the system into Recirculation The engine cooling system in air-conditioned vehicles Mode by pressing the Recirculation button. However, must be protected with a high-quality antifreeze coolant under certain conditions, while in Automatic Mode, to provide proper corrosion protection and to protect the system is blowing air out the defrost vents.
Page 286
284 UNDERSTANDING YOUR INSTRUMENT PANEL Window Fogging Outside Air Intake Interior fogging on the windshield can be quickly re- Make sure the air intake, located directly in front of the moved by turning the mode selector to Defrost. The Mix windshield, is free of obstructions such as leaves.
Page 287
UNDERSTANDING YOUR INSTRUMENT PANEL 285 Control Setting Suggestions for Various Weather Conditions...
292 STARTING AND OPERATING STARTING PROCEDURES Automatic Transmission Before starting your vehicle, adjust your seat, adjust the The shift lever must be in the PARK or NEUTRAL inside and outside mirrors, fasten your seat belt, and if position before you can start the engine. Apply the brakes present, instruct all other occupants to buckle their seat before shifting to any driving gear.
STARTING AND OPERATING 293 For vehicles equipped with Tip Start (Six-Speed Trans- If Engine Fails To Start mission), turn the ignition switch to the START position WARNING! and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage auto- •...
Page 296
294 STARTING AND OPERATING Without Tip Start If the engine shows no sign of starting after two 15- If the engine fails to start after you have followed the second periods of cranking with the accelerator pedal “Normal Starting” or “Extreme Cold Weather” proce- held to the floor, repeat the “Normal Starting”...
STARTING AND OPERATING 295 The engine block heater must be plugged in at least one CAUTION! hour to have an adequate warning effect on the engine. To prevent damage to the starter, wait 10 to 15 sec- WARNING! onds before trying again. Remember to disconnect the engine block heater After Starting cord before driving.
Page 298
296 STARTING AND OPERATING CAUTION! (Continued) WARNING! • Shift into or out of REVERSE only after the • It is dangerous to move the shift lever out of PARK vehicle has come to a complete stop and the engine or NEUTRAL if the engine speed is higher than is at idle speed.
STARTING AND OPERATING 297 Key Ignition Park Interlock WARNING! (Continued) This vehicle is equipped with a Key Ignition Park Inter- • Unintended movement of a vehicle could injure lock which requires the shift lever to be placed in PARK those in and near the vehicle. As with all vehicles, before the ignition switch can be turned to the LOCK/ you should never exit a vehicle while the engine is OFF position.
298 STARTING AND OPERATING be turned to the ON/RUN or START position (engine vehicle is stopped. Be sure to keep your foot on the brake running or not) and the brake pedal must be pressed. pedal when moving the shift lever between these gears. Four-Speed Automatic Transmission —...
Page 301
STARTING AND OPERATING 299 move the shift lever out of PARK. As an added precau- WARNING! (Continued) tion, turn the front wheels toward the curb on a downhill • It is dangerous to move the shift lever out of PARK grade and away from the curb on an uphill grade.
Page 302
300 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure • When leaving the vehicle, always remove the key those in or near the vehicle. As with all vehicles, fob from the ignition and lock your vehicle. Never you should never exit a vehicle while the engine is leave children alone in a vehicle, or with access to running.
Page 303
STARTING AND OPERATING 301 • Look at the shift lever position display and verify that CAUTION! it indicates the PARK position. • Before moving the shift lever out of PARK, you • With brake pedal released, verify that the shift lever must turn the ignition switch from the LOCK/OFF will not move out of PARK.
Page 304
302 STARTING AND OPERATING DRIVE WARNING! This range should be used for most city and highway driving. It provides the smoothest upshifts and down- Do not coast in NEUTRAL and never turn off the shifts, and the best fuel economy. The transmission ignition to coast down a hill.
Page 305
STARTING AND OPERATING 303 During cold temperatures, transmission operation may by reducing excessive shifting and heat build-up. The 3 be modified depending on engine and transmission range should also be used when descending steep grades temperature as well as vehicle speed. This feature im- to avoid brake system distress.
Page 306
304 STARTING AND OPERATING In the event of a momentary problem, the transmission If the transmission cannot be reset, dealer service is can be reset to regain all forward gears by performing the required. following steps: Overdrive Operation 1. Stop the vehicle. The automatic transmission includes an electronically controlled Overdrive (fourth gear).
STARTING AND OPERATING 305 Torque Converter Clutch Six-Speed Automatic Transmission (62TE) — If A feature designed to improve fuel economy has been Equipped included in the automatic transmission on your vehicle. The shift lever position display (located in the instrument A clutch within the torque converter engages automati- panel cluster) indicates the transmission gear range.
306 STARTING AND OPERATING Shifting from DRIVE to PARK or REVERSE should be done only after the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when moving the shift lever between these gears. The transmission shift lever has PARK, REVERSE, NEU- TRAL, DRIVE, and AutoStick shift positions.
Page 309
STARTING AND OPERATING 307 PARK WARNING! This range supplements the parking brake by locking the • Never use the PARK position as a substitute for transmission. The engine can be started in this range. Never attempt to use PARK while vehicle is in motion. the parking brake.
Page 310
308 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • It is dangerous to move the shift lever out of PARK • Unintended movement of a vehicle could injure or NEUTRAL if the engine speed is higher than those in or near the vehicle. As with all vehicles, idle speed.
Page 311
STARTING AND OPERATING 309 WARNING! (Continued) CAUTION! • When leaving the vehicle, always remove the key • Before moving the shift lever out of PARK, you fob from the ignition and lock your vehicle. Never must turn the ignition switch from the LOCK/OFF leave children alone in a vehicle, or with access to position to the ON/RUN position, and also press an unlocked vehicle.
Page 312
310 STARTING AND OPERATING • With brake pedal released, verify that the shift lever WARNING! will not move out of PARK. Do not coast in NEUTRAL and never turn off the REVERSE ignition to coast down a hill. These are unsafe This range is for moving the vehicle backward.
Page 313
STARTING AND OPERATING 311 DRIVE During cold temperatures, transmission operation may This range should be used for most city and highway be modified depending on engine and transmission driving. It provides the smoothest upshifts and down- temperature as well as vehicle speed. This feature im- shifts, and the best fuel economy.
Page 314
312 STARTING AND OPERATING PARK, REVERSE, and NEUTRAL will continue to oper- NOTE: Even if the transmission can be reset, we recom- ate. The Malfunction Indicator Light (MIL) may be illu- mend that you visit an authorized dealer at your earliest minated.
STARTING AND OPERATING 313 • vehicle speed is sufficiently high, and AUTOSTICK — IF EQUIPPED AutoStick is a driver-interactive feature providing • the driver is not heavily pressing the accelerator. manual shift control, giving you more control of the Torque Converter Clutch vehicle.
314 STARTING AND OPERATING • Avoid using speed control when AutoStick is en- NOTE: In AutoStick mode, the transmission will only shift up or down when the driver moves the shift lever to gaged. the right (+) or left (-), or as described below. •...
STARTING AND OPERATING 315 DRIVING ON SLIPPERY SURFACES Traction When driving on wet or slushy roads, it is possible for a Acceleration wedge of water to build up between the tire and road Rapid acceleration on snow covered, wet, or other slip- surface.
316 STARTING AND OPERATING DRIVING THROUGH WATER Shallow Standing Water Driving through water more than a few inches/ Although your vehicle is capable of driving through centimeters deep will require extra caution to ensure shallow standing water, consider the following Caution safety and prevent damage to your vehicle.
Page 319
STARTING AND OPERATING 317 CAUTION! (Continued) WARNING! • Driving through standing water may cause dam- • Driving through standing water limits your vehi- age to your vehicle’s drivetrain components. Al- cle’s traction capabilities. Do not exceed 5 mph ways inspect your vehicle’s fluids (i.e., engine oil, (8 km/h) when driving through standing water.
318 STARTING AND OPERATING • Upon initial start-up in cold weather, the power steer- POWER STEERING The standard power steering system will give you good ing pump may make noise for a short amount of time. vehicle response and increased ease of maneuverability This is due to the cold, thick fluid in the steering in tight spaces.
STARTING AND OPERATING 319 Power Steering Fluid Check WARNING! Checking the power steering fluid level at a defined service interval is not required. The fluid should only be Fluid level should be checked on a level surface and checked if a leak is suspected, abnormal noises are with the engine off to prevent injury from moving apparent, and/or the system is not functioning as antici- parts and to ensure accurate fluid level reading.
320 STARTING AND OPERATING PARKING BRAKE The parking brake lever is located in the center console. Before leaving the vehicle, make sure that the parking To apply the parking brake, pull the lever up as firmly as brake is fully applied. Also, be certain to leave the possible.
Page 323
STARTING AND OPERATING 321 When parking on a hill, it is important to turn the front WARNING! (Continued) wheels toward the curb on a downhill grade and away • Never leave children alone in a vehicle, or with from the curb on an uphill grade. Apply the parking access to an unlocked vehicle.
322 STARTING AND OPERATING CAUTION! WARNING! • Pumping of the anti-lock brakes will diminish If the “Brake Warning Light” remains on with the their effectiveness and may lead to a collision. parking brake released, a brake system malfunction Pumping makes the stopping distance longer. Just is indicated.
Page 325
STARTING AND OPERATING 323 The “Anti-Lock Brake Warning Light” moni- If both the “Brake Warning Light” and the “Anti-Lock tors the Anti-Lock Brake System. The light will Brake Warning Light” remain on, the Anti-Lock Brake come on when the ignition switch is turned to (ABS) and Electronic Brake Force Distribution (EBD) the ON position and may stay on for as long as Systems are not functioning.
324 STARTING AND OPERATING You also may experience the following when the brake WARNING! system goes into anti-lock: The Anti-Lock Brake System contains sophisticated • The ABS motor running (it may continue to run for a electronic equipment that may be susceptible to short time after the stop), interference caused by improperly installed or high •...
STARTING AND OPERATING 325 vehicle stability and control in various driving conditions brake of the spinning wheel. This will allow more engine and are commonly referred to as ESC. torque to be applied to the wheel that is not spinning. This feature remains active even if TCS and ESC are in Anti-Lock Brake System (ABS) the “Partial Off”...
326 STARTING AND OPERATING Electronic Stability Control (ESC) WARNING! This system enhances directional control and stability of • The BAS cannot prevent the natural laws of phys- the vehicle under various driving conditions. ESC cor- ics from acting on the vehicle, nor can it increase rects for over/under steering of the vehicle by applying braking efficiency beyond that afforded by the the brake of the appropriate wheel to assist in counter-...
Page 329
STARTING AND OPERATING 327 ESC Operating Modes WARNING! All ESC equipped vehicles can choose the following ESC operating modes: Electronic Stability Control (ESC) cannot prevent the natural laws of physics from acting on the vehicle, ESC On nor can it increase the traction afforded by prevailing This is the normal operating mode for ESC.
Page 330
328 STARTING AND OPERATING reduction. This mode is intended to be used if the vehicle To turn ESC on again, momentarily press the “ESC Off” is in deep snow, sand, or gravel conditions and more switch. This will restore the normal “ESC On” mode of wheel spin than ESC would normally allow is required to operation.
STARTING AND OPERATING 329 ESC Activation/Malfunction Indicator Light And Malfunction Indicator Light” begins to flash during ac- ESC OFF Indicator Light celeration, ease up on the accelerator and apply as little The “ESC Activation/Malfunction Indicator throttle as possible. Be sure to adapt your speed and Light”...
330 STARTING AND OPERATING TIRE SAFETY INFORMATION NOTE: • P (Passenger) - Metric tire sizing is based on U.S. Tire Markings design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. •...
Page 333
STARTING AND OPERATING 331 • High flotation tire sizing is based on U.S. design compact spare tires have the letter “T” or “S” molded into the sidewall preceding the size designation. Ex- standards and it begins with the tire diameter molded ample: T145/80D18 103M.
Page 334
332 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —...
STARTING AND OPERATING 333 Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall The TIN may be found on one or both sides of the tire, tires as mounted on the vehicle. If the TIN is not found on however, the date code may only be on one side.
334 STARTING AND OPERATING Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the Cold Tire Inflation Pressure vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
STARTING AND OPERATING 335 Tire Loading And Tire Pressure Tire And Loading Information Placard Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door.
Page 338
336 STARTING AND OPERATING axles must not be exceeded. For further information on This placard tells you important information about GAWRs, vehicle loading, and trailer towing, refer to the: “Vehicle Loading” in this section. 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of...
Page 339
STARTING AND OPERATING 337 3. Subtract the combined weight of the driver and pas- 6. If your vehicle will be towing a trailer, load from your sengers from XXX lbs or XXX kg. trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available 4.
STARTING AND OPERATING 339 Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
340 STARTING AND OPERATING Tire Inflation Pressures WARNING! (Continued) The proper cold tire inflation pressure is listed on the • Unequal tire pressures from one side of the ve- driver’s side B-Pillar or rear edge of the driver’s side hicle to the other can cause the vehicle to drift to door.
Page 343
STARTING AND OPERATING 341 Tire pressures change by approximately 1 psi (7 kPa) per CAUTION! 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in After inspecting or adjusting the tire pressure, al- the winter.
342 STARTING AND OPERATING Tire Pressures For High Speed Operation Radial-Ply Tires The manufacturer advocates driving at safe speeds WARNING! within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle...
STARTING AND OPERATING 343 vehicle. If your vehicle has this option refer to an Compact Spare Tire – If Equipped authorized tire dealer for the recommended tire rotation The compact spare is for temporary emergency use only. pattern. You can identify if your vehicle is equipped with a compact spare by looking at the spare tire description on If your vehicle is not equipped with an original equip- the Tire and Loading Information Placard located on the...
344 STARTING AND OPERATING your original equipment tire, replace (or repair) the WARNING! original equipment tire and reinstall on the vehicle at the first opportunity. Compact spares are for temporary emergency use only. With these spares, do not drive more than Limited-Use Spare –...
STARTING AND OPERATING 345 Tire Spinning WARNING! When stuck in mud, sand, snow, or icy conditions, do not spin your vehicle’s wheels faster than 30 mph (48 km/h) Limited-use spares are for emergency use only. In- or for longer than 30 seconds continuously without stallation of this limited-use spare tire affects vehicle stopping.
346 STARTING AND OPERATING Tread Wear Indicators These indicators are molded into the bottom of the tread Tread wear indicators are in the original equipment tires grooves. They will appear as bands when the tread depth to help you in determining when your tires should be becomes 1/16 in (2 mm).
STARTING AND OPERATING 347 Keep dismounted tires in a cool, dry place with as little It is recommended to replace the two front tires or two exposure to light as possible. Protect tires from contact rear tires as a pair. Replacing just one tire can seriously with oil, grease, and gasoline.
348 STARTING AND OPERATING WARNING! WARNING! (Continued) • Failure to equip your vehicle with tires having • Do not use a tire, wheel size or rating other than adequate speed capability can result in sudden tire that specified for your vehicle. Some combinations failure and loss of vehicle control.
STARTING AND OPERATING 349 SNOW TIRES poorer than that of non-studded tires. Some states pro- Some areas of the country require the use of snow tires hibit studded tires; therefore, local laws should be during the winter. All season tires can be identified by the checked before using these tire types.
350 STARTING AND OPERATING The suggested rotation method is the “rearward cross” TIRE PRESSURE MONITOR SYSTEM (TPMS) shown in the following diagram. This rotation pattern The Tire Pressure Monitor System (TPMS) will warn the does not apply to some directional tires that must not be driver of a low tire pressure based on the vehicle recom- reversed.
Page 353
STARTING AND OPERATING 351 The TPM System will warn the driver of a low tire For example, your vehicle may have a recommended pressure if the tire pressure falls below the low-pressure cold (parked for more than three hours) placard pressure warning limit for any reason, including low temperature of 30 psi (207 kPa).
Page 354
352 STARTING AND OPERATING NOTE: CAUTION! • The TPMS is not intended to replace normal tire care • The TPMS has been optimized for the original and maintenance, or to provide warning of a tire failure or condition. equipment tires and wheels. TPMS pressures and warning have been established for the tire size •...
STARTING AND OPERATING 353 • Seasonal temperature changes will affect tire pressure, Tire Pressure Monitoring Low Pressure Warnings and the TPMS will monitor the actual tire pressure in The “Tire Pressure Monitoring Telltale Light” will the tire. illuminate in the instrument cluster, a LOW TIRE message will be displayed for a minimum of five Base System seconds and a chime will sound when tire pressure is low...
Page 356
354 STARTING AND OPERATING sound a chime. If the ignition key is cycled, this sequence NOTE: will repeat, providing the system fault still exists. The 1. The compact spare tire (if equipped) does not have a “Tire Pressure Monitoring Telltale Light” will turn off tire pressure monitoring sensor.
STARTING AND OPERATING 355 5. Once you repair or replace the original road tire, and The TPMS consists of the following components: reinstall it on the vehicle in place of the compact spare, • Receiver Module the TPMS will update automatically and the “Tire Pres- •...
Page 358
356 STARTING AND OPERATING Tire Pressure Monitoring Low Pressure Warnings The “Tire Pressure Monitoring Telltale Light” will illuminate in the instrument cluster and a chime will sound when tire pressure is low in one or more of the four active road tires. In addition, the Electronic Vehicle Information Center (EVIC) will display a graphic showing the pressure values of each tire with the low tire pressure values flashing.
Page 359
STARTING AND OPERATING 357 Should this occur, you should stop as soon as possible, display dashes (- -) in place of the pressure value to and inflate all tires with low pressure (those flashing in indicate which sensor is not being received. the EVIC graphic) to the vehicle’s recommended cold placard pressure value.
Page 360
358 STARTING AND OPERATING If the ignition key is cycled, this sequence will repeat, The EVIC will also display a CHECK TPM SYSTEM providing the system fault still exists. If the system fault message for a minimum of five seconds when a system no longer exists, the “Tire Pressure Monitoring Telltale fault related to an incorrect sensor location fault is Light”...
STARTING AND OPERATING 359 Monitoring Telltale Light” will remain ON, a chime will the TPMS will update automatically. In addition, the sound, and the EVIC will still display a flashing pressure “Tire Pressure Monitoring Telltale Light” will turn OFF value in the graphic display. and the graphic in the EVIC will display a new pressure value instead of dashes (- -), as long no tire pressure is 3.
360 STARTING AND OPERATING The tire pressure sensors are covered under one of the as hard starting, stalling, and hesitations. If you experi- following licenses: ence these symptoms, try another brand of gasoline before considering service for the vehicle. United States ....KR5S18002015B Over 40 auto manufacturers worldwide have issued and Canada.
STARTING AND OPERATING 361 The manufacturer supports the use of reformulated gaso- Problems that result from using gasoline containing line. Properly blended reformulated gasoline will pro- Methanol or gasoline containing more than 10% Ethanol vide excellent performance and durability of engine and are not the responsibility of the manufacturer and may fuel system components.
362 STARTING AND OPERATING To fix a Non-FFV vehicle inadvertently fueled once with therefore, you should ask your gasoline retailer whether E-85 perform the following: the gasoline contains MMT. It is even more important to look for gasoline without MMT in Canada, because MMT •...
STARTING AND OPERATING 363 Fuel System Cautions CAUTION! (Continued) • The use of fuel additives, which are now being CAUTION! sold as octane enhancers, is not recommended. Follow these guidelines to maintain your vehicle’s Most of these products contain high concentra- performance: tions of methanol.
364 STARTING AND OPERATING Carbon Monoxide Warnings WARNING! (Continued) • Guard against carbon monoxide with proper WARNING! maintenance. Have the exhaust system inspected Carbon monoxide (CO) in exhaust gases is deadly. every time the vehicle is raised. Have any abnor- Follow the precautions below to prevent carbon mal conditions repaired promptly.
STARTING AND OPERATING 365 the other sections of this manual for information on CAUTION! features that are common between Flexible Fuel and gasoline-only powered vehicles. Only vehicles with the E-85 fuel filler door label can operate on E-85. Ethanol Fuel (E-85) E-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline.
366 STARTING AND OPERATING Fuel Requirements NOTE: • When the ambient temperature is above 90° F (32° C), Your vehicle will operate on both unleaded gasoline with an octane rating of 87, or E-85 fuel, or any mixture of you may experience hard starting and rough idle these two.
STARTING AND OPERATING 367 requirements of Material Standard MS-6395. MS-6395 Cruising Range contains additional requirements, developed during ex- Because E-85 fuel contains less energy per gallon/liter tensive fleet testing, to provide additional protection to than gasoline, you will experience an increase in fuel Chrysler Group LLC engines.
368 STARTING AND OPERATING Maintenance CAUTION! Do not use ethanol mixture greater than 85% in your vehicle. It will cause difficulty in cold starting and may affect driveability. ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is behind the fuel filler door, on the left rear quarter panel of the vehicle.
Page 371
STARTING AND OPERATING 369 CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap may cause the “Malfunc- tion Indicator Light (MIL)” to turn on. •...
370 STARTING AND OPERATING Loose Filler Cap Message WARNING! (Continued) If the vehicles diagnostic system determines that the fuel • Never add fuel when the engine is running. This is filler cap in loose, improperly installed, or damaged, a in violation of most state and federal fire regula- “gASCAP”...
STARTING AND OPERATING 371 The label contains the following information: Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. • Name of manufacturer This includes driver, passengers, and cargo. The total • Month and year of manufacture load must be limited so that you do not exceed the GVWR.
372 STARTING AND OPERATING Overloading Loading The load carrying components (axle, springs, tires, To load your vehicle properly, first figure out its empty wheels, etc.) of your vehicle will provide satisfactory weight, axle by axle and side by side. Store heavier items service as long as you do not exceed the GVWR and front down low and be sure you distribute their weight as and rear GAWR.
STARTING AND OPERATING 373 TRAILER TOWING Common Towing Definitions In this section, you will find safety tips and information The following trailer towing related definitions will assist on limits to the type of towing you can reasonably do you in understanding the following information: with your vehicle.
Page 376
374 STARTING AND OPERATING Gross Combination Weight Rating (GCWR) WARNING! The GCWR is the total permissible weight of your vehicle and trailer when weighed in combination. It is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition NOTE: The GCWR rating includes a 150 lbs (68 kg) can result if either rating is exceeded.
STARTING AND OPERATING 375 Weight-Carrying Hitch Trailer Hitch Classification Definitions A weight-carrying hitch supports the trailer tongue Class Max. Trailer Hitch Industry weight, just as if it were luggage located at a hitch ball or Standards some other connecting point of the truck. These kinds of Class I - Light Duty 2,000 lbs (907 kg) hitches are the most popular on the market today and...
376 STARTING AND OPERATING Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Maximum Trailer Weight Ratings Max. Trailer Tongue Wt. Engine/Transmission Max. Frontal Area Max. GTW (Gross Trailer Wt.) (See Note 1) 2.4L/Auto See Note 2...
STARTING AND OPERATING 377 CAUTION! Towing a trailer with a larger than recommended frontal area could cause the engine to overheat or cause severe engine damage under extreme condi- tions. Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer.
378 STARTING AND OPERATING NOTE: Remember that everything put into or on the Towing Requirements trailer adds to the load on your vehicle. Also, additional To promote proper break-in of your new vehicle drive- factory-installed options, or authorized dealer-installed train components the following guidelines are recom- options, must be considered as part of the total load on mended: your vehicle.
Page 381
STARTING AND OPERATING 379 WARNING! WARNING! (Continued) • Safety chains must always be used between your Improper towing can lead to a collision. Follow these vehicle and trailer. Always connect the chains to guidelines to make your trailer towing as safe as the frame or hook retainers of the vehicle hitch.
Page 382
380 STARTING AND OPERATING • Check for signs of tire wear or visible tire damage WARNING! (Continued) before towing a trailer. Refer to “Tires – General 3. GAWR Information” in “Starting and Operating” for informa- 4. Trailer tongue weight rating for the trailer hitch tion on tread wear indicators and for proper inspection utilized (This requirement may limit the ability to procedure.
Page 383
STARTING AND OPERATING 381 • An electronically actuated trailer brake controller is WARNING! required when towing a trailer with electronically • Do not connect trailer brakes to your vehicle’s actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic hydraulic brake lines.
382 STARTING AND OPERATING Towing Tips If you REGULARLY TOW a trailer for more than 45 min- Before setting out on a trip, practice turning, stopping, utes of continuous operation, then change the automatic and backing the trailer in an area located away from transmission fluid and filter according to the interval heavy traffic.
STARTING AND OPERATING 383 Electronic Speed Control – If Equipped Cooling System To reduce potential for engine and transmission over- • Do not use in hilly terrain or with heavy loads. heating, take the following actions: • When using the speed control, if you experience speed •...
384 STARTING AND OPERATING Recreational Towing – All Models CAUTION! Recreational towing is allowed ONLY if the front wheels • DO NOT flat tow this vehicle. Damage to the are OFF the ground. This may be accomplished using a tow dolly or vehicle trailer. If using a tow dolly, follow drivetrain will result.
386 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel, below the radio. potential for overheating by taking the appropriate ac- tion.
WHAT TO DO IN EMERGENCIES 387 NOTE: There are steps that you can take to slow down Engine Oil Overheating (2.4L Engine Only) — If an impending overheat condition: Equipped During sustained high-speed driving or trailer tow up • If your air conditioner (A/C) is on, turn it off. The A/C long grades on a hot day, the engine oil temperature may system adds heat to the engine cooling system and become too hot.
388 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! (Continued) • The jack is designed to be used as a tool for WARNING! changing tires only. The jack should not be used to • Do not attempt to change a tire on the side of the lift the vehicle for service purposes.
WHAT TO DO IN EMERGENCIES 389 Spare Tire Removal Preparations For Jacking Lift up the load floor cover and remove the hold down. 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel.
390 WHAT TO DO IN EMERGENCIES 6. Block both the front and rear of the WARNING! (Continued) wheel diagonally opposite the jacking • Always park on a firm, level surface as far from position. For example, if changing the the edge of the roadway as possible before raising right front tire, block the left rear the vehicle.
Page 393
WHAT TO DO IN EMERGENCIES 391 WARNING! (Continued) CAUTION! • Only use the jack in the positions indicated and Do not attempt to raise the vehicle by jacking on for lifting this vehicle during a tire change. locations other than those indicated in the Jacking •...
Page 394
392 WHAT TO DO IN EMERGENCIES NOTE: The jack handle attaches to the side of the jack CAUTION! with two attachment points. When the jack is partially expanded, the tension between the two attachment Do not attempt to raise the vehicle by jacking on points holds the jack handle in place.
Page 395
WHAT TO DO IN EMERGENCIES 393 3. There is a front and rear jacking location on each side of the vehicle. Rear Jacking Location 4. Turn the jack screw to the left until the jack can be placed under the jacking location. Once the jack is Front Jacking Location positioned, turn the jack screw to the right until the jack head is properly engaged with the lift area closest to the...
Page 396
394 WHAT TO DO IN EMERGENCIES WARNING! CAUTION! Raising the vehicle higher than necessary can make Be sure to mount the spare tire with the valve stem the vehicle less stable. It could slip off the jack and facing outward. The vehicle could be damaged if the hurt someone near it.
Page 397
WHAT TO DO IN EMERGENCIES 395 9. Remove the wheel blocks and lower the jack until it is WARNING! free. Reassemble the lug wrench to the jack assembly and • To avoid the risk of forcing the vehicle off the jack, stow it in the spare tire area.
396 WHAT TO DO IN EMERGENCIES Road Tire Installation Vehicles Equipped With Wheel Covers 1. Mount the road tire on the axle. 2. To ease the installation process for steel wheels with wheel covers, install two lug nuts on the mounting studs which are on each side of the valve stem.
Page 399
WHAT TO DO IN EMERGENCIES 397 4. Install the remaining lug nuts with the cone shaped correct tightness, have them checked with a torque end of the nut toward the wheel. Lightly tighten the lug wrench by your authorized dealer or service station. nuts.
398 WHAT TO DO IN EMERGENCIES 3. Lower the vehicle to the ground by turning the jack NOTE: When using a portable battery booster pack handle counterclockwise. follow the manufacturer’s operating instructions and precautions. 4. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for increased CAUTION! leverage.
Page 401
WHAT TO DO IN EMERGENCIES 399 shield. To allow jump-starting there are remote battery WARNING! posts located on the left side of the engine compartment. • Take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on.
400 WHAT TO DO IN EMERGENCIES 3. Remove the protective cover over the remote positive WARNING! (+) battery post. To remove the cover, press the locking tab and pull upward on the cover. Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result.
Page 403
WHAT TO DO IN EMERGENCIES 401 1. Connect the positive (+) end of the jumper cable to the 5. Start the engine in the vehicle that has the booster remote positive (+) post of the discharged vehicle. battery, let the engine idle a few minutes, and then start the engine in the vehicle with the discharged battery.
402 WHAT TO DO IN EMERGENCIES 10. Reinstall the protective cover over the remote posi- front wheels. Then shift back and forth between DRIVE tive (+) battery post of the discharged vehicle. and REVERSE. Using minimal accelerator pedal pressure to maintain the rocking motion, without spinning the If frequent jump-starting is required to start your vehicle wheels, is most effective.
WHAT TO DO IN EMERGENCIES 403 CAUTION! WARNING! • When “rocking” a stuck vehicle by moving be- Fast spinning tires can be dangerous. Forces gener- tween DRIVE and REVERSE, do not spin the ated by excessive wheel speeds may cause damage, or wheels faster than 15 mph (24 km/h), or drivetrain even failure, of the axle and tires.
404 WHAT TO DO IN EMERGENCIES 3. Turn the ignition switch to the ON/RUN position 6. Move the shift lever into the NEUTRAL position. without starting the engine. 7. The vehicle may then be started in NEUTRAL. 4. Press and maintain firm pressure on the brake pedal. 8.
WHAT TO DO IN EMERGENCIES 405 main structural members of the vehicle, not to bumpers CAUTION! (Continued) or associated brackets. State and local laws applying to • Do not push or tow this vehicle with another vehicles under tow must be observed. vehicle as damage to the bumper fascia and trans- If you must use the accessories (wipers, defrosters, etc.) mission may result.
406 WHAT TO DO IN EMERGENCIES • The towing distance must not exceed 15 mi (24 km). Without The Ignition Key Special care must be taken when the vehicle is towed • The towing speed must not exceed 25 mph (40 km/h). with the ignition in the LOCK position.
MAINTAINING YOUR VEHICLE 411 ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic further damage to the emission control system.
412 MAINTAINING YOUR VEHICLE persists, the message will appear the next time the Normally, the OBD II system will be ready. The OBD II vehicle is started. This might indicate a damaged cap. If system may not be ready if your vehicle was recently the problem is detected twice in a row, the system will serviced, recently had a dead battery or a battery replace- turn on the “Malfunction Indicator Light (MIL).”...
MAINTAINING YOUR VEHICLE 413 4. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced a.
414 MAINTAINING YOUR VEHICLE DEALER SERVICE MAINTENANCE PROCEDURES Your authorized dealer has the qualified service person- The pages that follow contain the required maintenance nel, special tools, and equipment to perform all service services determined by the engineers who designed your operations in an expert manner.
MAINTAINING YOUR VEHICLE 415 fully warmed engine is shut off. Do not check oil level CAUTION! (Continued) before starting the engine after it has sat overnight. • Your vehicle has been built with improved fluids Checking engine oil level when the engine is cold will that protect the performance and durability of give you an incorrect reading.
Page 418
416 MAINTAINING YOUR VEHICLE Engine Oil Selection CAUTION! For best performance and maximum protection under all types of operating conditions, the manufacturer recom- Do not overfill the engine. Overfilling the engine mends engine oils that are API Certified and meet the will cause oil aeration, which can lead to loss of oil requirements of Chrysler Material Standard MS-6395.
Page 419
MAINTAINING YOUR VEHICLE 417 Lubricants which do not have both the engine oil certi- CAUTION! fication mark and the correct SAE viscosity grade num- ber should not be used. Do not use chemical flushes in your engine oil as the chemicals can damage your engine.
418 MAINTAINING YOUR VEHICLE Lubricants which do not have both, the engine oil certi- station, or governmental agency for advice on how and fication mark and the correct SAE viscosity grade num- where used oil and oil filters can be safely discarded in ber should not be used.
MAINTAINING YOUR VEHICLE 419 Engine Air Cleaner Filter Engine Air Cleaner Filter Selection The quality of replacement engine air cleaner filters WARNING! varies considerably. Only high quality filters should be used to assure most efficient service. MOPAR engine air The air induction system (air cleaner, hoses, etc.) can cleaner filters are high quality and are recommended.
Page 422
420 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can • It is essential when replacing the cables on the burn or even blind you. Do not allow battery fluid battery that the positive cable is attached to the to contact your eyes, skin, or clothing.
MAINTAINING YOUR VEHICLE 421 Air Conditioner Maintenance WARNING! For best possible performance, your air conditioner • Use only refrigerants and compressor lubricants should be checked and serviced by an authorized dealer at the start of each warm season. This service should approved by the manufacturer for your air condi- include cleaning of the condenser fins and a performance tioning system.
422 MAINTAINING YOUR VEHICLE Refrigerant Recovery And Recycling The A/C Air Filter is located in the fresh air inlet behind R-134a air conditioning refrigerant is a hydrofluoro- the glove box. Perform the following procedure to re- carbon (HFC) that is endorsed by the Environmental place the filter: Protection Agency and is an ozone-saving product.
MAINTAINING YOUR VEHICLE 423 CAUTION! The A/C Air Filter is identified with an arrow to indicate airflow direction through the filter. Failure to install the filter properly will result in the need to replace it more often. 8. Reinstall the glove box door dampener and glove box. Body Lubrication Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate,...
424 MAINTAINING YOUR VEHICLE hood latching components to ensure proper function. Operation of the wipers on dry glass for long periods When performing other underhood services, the hood may cause deterioration of the wiper blades. Always use latch, release mechanism and safety catch should be washer fluid when using the wipers to remove salt or dirt cleaned and lubricated.
MAINTAINING YOUR VEHICLE 425 Adding Washer Fluid Exhaust System The fluid reservoir for the windshield washers is located The best protection against carbon monoxide entry into in the engine compartment. Be sure to check the fluid the vehicle body is a properly maintained engine exhaust level in the reservoir at regular intervals.
Page 428
426 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Exhaust gases can injure or kill. They contain • The catalytic converter requires the use of un- carbon monoxide (CO), which is colorless and leaded fuel only. Leaded gasoline will destroy the odorless. Breathing it can make you unconscious effectiveness of the catalyst as an emissions con- and can eventually poison you.
Page 429
MAINTAINING YOUR VEHICLE 427 Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter dam- verter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage.
428 MAINTAINING YOUR VEHICLE Cooling System rusty in appearance, the system should be drained, flushed, and refilled with fresh engine coolant (anti- WARNING! freeze). Check the front of the A/C condenser for any accumulation of bugs, leaves, etc. If dirty, clean by gently •...
Page 431
MAINTAINING YOUR VEHICLE 429 Selection Of Coolant CAUTION! (Continued) Use only the manufacturer’s recommended coolant. Re- • Do not use water alone or alcohol-based engine fer to “Fluids, Lubricants, and Genuine Parts” in “Main- coolant (antifreeze) products. Do not use addi- taining Your Vehicle”...
Page 432
430 MAINTAINING YOUR VEHICLE Please review these recommendations for using Hybrid Please note that it is the owner’s responsibility to main- Organic Additive Technology (HOAT) engine coolant tain the proper level of protection against freezing ac- (antifreeze). When adding engine coolant (antifreeze): cording to the temperatures occurring in the area where the vehicle is operated.
Page 433
MAINTAINING YOUR VEHICLE 431 rules for your community. To prevent ingestion by ani- WARNING! mals or children, do not store ethylene glycol based • The warning words “DO NOT OPEN HOT” on engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground.
Page 434
432 MAINTAINING YOUR VEHICLE The radiator normally remains completely full, so there is If an examination of your engine compartment shows no no need to remove the radiator cap unless checking for evidence of radiator or hose leaks, the vehicle may be engine coolant (antifreeze) freeze point or replacing cool- safely driven.
MAINTAINING YOUR VEHICLE 433 • Make sure that the radiator and coolant recovery WARNING! bottle overflow hoses are not kinked or obstructed. Riding the brakes can lead to brake failure and • Keep the front of the radiator clean. If your vehicle is possibly a collision.
Page 436
434 MAINTAINING YOUR VEHICLE Clean the top of the master cylinder area before removing WARNING! the cap. If necessary, add fluid to bring the fluid level up • Use only manufacturer’s recommended brake to the requirements described on the brake fluid reser- voir.
MAINTAINING YOUR VEHICLE 435 WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or • Do not allow petroleum based fluid to contami- moisture, use only new brake fluid or fluid that nate the brake fluid. Brake seal components could has been in a tightly closed container.
Page 438
436 MAINTAINING YOUR VEHICLE Parts” in “Maintaining Your Vehicle” for further informa- Special Additives tion. It is important that the transmission fluid be main- Automatic Transmission Fluid (ATF) is an engineered tained at the prescribed level using the recommended product and its performance may be impaired by supple- fluid.
Page 439
MAINTAINING YOUR VEHICLE 437 Fluid Level Check – Four-Speed Automatic driven at least 15 miles (24 km). Hot fluid cannot be held Transmission comfortably between the fingertips. Cold fluid is at a Use the following procedure to check the automatic temperature below 80°...
438 MAINTAINING YOUR VEHICLE Fluid Level Check – Six-Speed Automatic CAUTION! Transmission • Using a transmission fluid other than the manu- The automatic transmission has no dipstick and is dealer serviced only. facturer’s recommended fluid may cause deterio- ration in transmission shift quality and/or torque Transmission Fluid And Filter Changes converter shudder.
Page 441
MAINTAINING YOUR VEHICLE 439 road surfaces on which the vehicle is operated, extreme Washing hot or cold weather and other extreme conditions will • Wash your vehicle regularly. Always wash your ve- have an adverse effect on paint, metal trim, and under- hicle in the shade using MOPAR Car Wash or equiva- body protection.
Page 442
440 MAINTAINING YOUR VEHICLE • If you detect any stone chips or scratches in the paint, CAUTION! touch them up immediately. The cost of such repairs is • Do not use abrasive or strong cleaning materials considered the responsibility of the owner. such as steel wool or scouring powder, which will •...
Page 443
MAINTAINING YOUR VEHICLE 441 Wheel And Wheel Trim Care Cleaning Headlights Your vehicle has plastic headlights that are lighter and • All wheels and wheel trim, especially aluminum and less susceptible to stone breakage than glass headlights. chrome plated wheels, should be cleaned regularly with a mild soap and water to prevent corrosion.
Page 444
442 MAINTAINING YOUR VEHICLE Stain Repel Fabric Cleaning Procedure – If Interior Care Equipped Instrument Panel Cover Stain Repel seats may be cleaned in the following man- The instrument panel cover has a low glare surface, ner: which minimizes reflections in the windshield. Do not •...
Page 445
MAINTAINING YOUR VEHICLE 443 Your leather upholstery can be best preserved by regular Glass Surfaces cleaning with a damp soft cloth. Small particles of dirt All glass surfaces should be cleaned on a regular basis can act as an abrasive and damage the leather upholstery with MOPAR Glass Cleaner or any commercial and should be removed promptly with a damp cloth.
444 MAINTAINING YOUR VEHICLE 1. Clean with a wet, soft rag. A mild soap solution may Cleaning Center Console Cupholders be used, but do not use high alcohol content or abrasive Removal cleaners. If soap is used, wipe clean with a clean damp Grab the rubber portion of the cupholder and lift rag.
MAINTAINING YOUR VEHICLE 445 FUSES Integrated Power Module The Integrated Power Module is located in the engine compartment near the air cleaner assembly. This center contains cartridge fuses and mini fuses. A label that identifies each component may be printed on the inside of the cover.
Page 448
446 MAINTAINING YOUR VEHICLE Cartridge Mini Cartridge Mini Cavity Description Cavity Description Fuse Fuse Fuse Fuse Center High Battery Feed – Power 10 Amp Mounted Stop Light 40 Amp Seats – If Equipped/ — (CHMSL)/Brake Green PZEV Air Pump – If Switch Equipped 10 Amp...
Page 449
MAINTAINING YOUR VEHICLE 447 Cartridge Mini Cartridge Mini Cavity Description Cavity Description Fuse Fuse Fuse Fuse 40 Amp Ignition Run – Cli- — Radiator Fan Relay Green 10 Amp mate Controls/Hot — Cupholder – If Cigar Lighter/ 15 Amp Equipped —...
Page 450
448 MAINTAINING YOUR VEHICLE Cartridge Mini Cartridge Mini Cavity Description Cavity Description Fuse Fuse Fuse Fuse Ignition Run – Occu- 30 Amp Auto Shutdown — pant Classification Pink (ASD) Relay 1 10 Amp — Module (OCM)/ Switch Bank/ Occupant Restraint Diagnostic Link 10 Amp Controller (ORC)
Page 451
MAINTAINING YOUR VEHICLE 449 Cartridge Mini CAUTION! Cavity Description Fuse Fuse • When installing the Integrated Power Module Anti-Lock Brakes cover, it is important to ensure the cover is prop- (ABS) Module – If erly positioned and fully latched. Failure to do so 40 Amp Equipped/Electronic —...
450 MAINTAINING YOUR VEHICLE VEHICLE STORAGE REPLACEMENT BULBS If you will not be using your vehicle for more than All the inside bulbs are brass or glass wedge base. 21 days, you may want to take steps to preserve your Aluminum base bulbs are not approved and should not battery.
MAINTAINING YOUR VEHICLE 451 NOTE: It may be necessary to remove the air cleaner LIGHT BULBS – Exterior Bulb No. filter housing and position the totally integrated power Low Beam Headlamp..... 9006 module aside prior to replacing the low beam headlamp High Beam Headlamp .
Page 454
452 MAINTAINING YOUR VEHICLE 3. Rotate bulb and connector ⁄ turn and pull outward 4. Pull the bulb out of the socket and replace the bulb. from assembly. 5. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. CAUTION! 6.
MAINTAINING YOUR VEHICLE 453 Fog Lamps Backup Lamps 1. Access to the lamps through the lower fascia cutout is 1. Open the trunk and gently pull back the trunk liner limited. behind the tail lamp. 2. Turn the steering wheel to allow access and remove 2.
454 MAINTAINING YOUR VEHICLE 3. Grasp the tail lamp and pull firmly outward pushing 4. Twist and remove socket from lamp. gently on the studs from inside to disengage the lamp 5. Remove bulb from socket and replace. housing. License Plate Lamp 1.
456 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Engine Coolant Organic Additive Technology) or equivalent. Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Engine Oil –...
Page 462
460 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE Based on engine operation conditions the oil change The Scheduled Maintenance services listed in this indicator message will illuminate, this means that service manual must be done at the times or mileages specified is required for your vehicle. Have your vehicle serviced to protect your vehicle warranty and ensure the best as soon as possible, within the next 500 miles (805 km).
Page 463
MAINTENANCE SCHEDULES 461 Your authorized dealer will reset the oil change indicator At Each Stop For Fuel message after completing the scheduled oil change. If a • Check the engine oil level about five minutes after a scheduled oil change is performed by someone other fully warmed engine is shut off.
Page 464
462 MAINTENANCE SCHEDULES Once A Month At Each Oil Change • Check tire pressure and look for unusual wear or • Change the engine oil filter. damage. • Inspect the brake hoses and lines. • Inspect the battery and clean and tighten the terminals CAUTION! as required.
Page 465
MAINTENANCE SCHEDULES 463 8,000 Miles (13,000 km) or 16,000 Miles (26,000 km) or 12 Months Maintenance Service 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
464 MAINTENANCE SCHEDULES 24,000 Miles (39,000 km) or 32,000 Miles (52,000 km) or 24 Months Maintenance Service 18 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 467
MAINTENANCE SCHEDULES 465 40,000 Miles (65,000 km) or 48,000 Miles (78,000 km) or 36 Months Maintenance Service 30 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 468
466 MAINTENANCE SCHEDULES 56,000 Miles (91,000 km) or 64,000 Miles (104,000 km) or 48 Months Maintenance Service 42 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 469
MAINTENANCE SCHEDULES 467 72,000 Miles (117,000 km) or 80,000 Miles (130,000 km) or 60 Months Maintenance Service 54 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 470
468 MAINTENANCE SCHEDULES 88,000 Miles (143,000 km) or 96,000 Miles (156,000 km) or 72 Months Maintenance Service 66 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 471
MAINTENANCE SCHEDULES 469 104,000 Miles (169,000 km) or 112,000 Miles (182,000 km) or 84 Months Maintenance Service 78 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 472
470 MAINTENANCE SCHEDULES 120,000 Miles (195,000 km) or 128,000 Miles (208,000 km) or 96 Months Maintenance Service 90 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 473
MAINTENANCE SCHEDULES 471 136,000 Miles (221,000 km) or 144,000 Miles (234,000 km) or 108 Months Maintenance Service 102 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 474
472 MAINTENANCE SCHEDULES 152,000 Miles (247,000 km) or 114 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 152,000 miles (247 000 km). Odometer Reading Date Repair Order #...
Page 475
MAINTENANCE SCHEDULES 473 WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS Suggestions For Obtaining Service For Your Customer Assistance For The Hearing Or Vehicle......477 Speech Impaired (TDD/TTY) .
Page 478
476 IF YOU NEED CONSUMER ASSISTANCE Department Of Transportation Uniform Tire Traction Grades ..... 483 Quality Grades ......483 Temperature Grades .
IF YOU NEED CONSUMER ASSISTANCE 477 SUGGESTIONS FOR OBTAINING SERVICE FOR the service advisor and list the items in order of priority. YOUR VEHICLE At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the...
478 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer’s service manager first. Most matters can be re- P.O. Box 21–8004 solved with this process. Auburn Hills, MI 48321–8004 Phone: (800) 423–6343 •...
IF YOU NEED CONSUMER ASSISTANCE 479 Customer Assistance For The Hearing Or Speech the manufacturer’s service contracts. If you purchased a Impaired (TDD/TTY) manufacturer’s service contract, you will receive Plan To assist customers who have hearing difficulties, the Provisions and an Owner Identification Card in the mail manufacturer has installed special TDD (Telecommuni- within three weeks of the vehicle delivery date.
480 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment WARRANTY INFORMATION when you purchased the vehicle. An authorized dealer See the Warranty Information Booklet, located on the has also made a major investment in facilities, tools, and DVD, for the terms and provisions of Chrysler Group training to assure that you are absolutely delighted with LLC warranties applicable to this vehicle and market.
IF YOU NEED CONSUMER ASSISTANCE 481 If NHTSA receives similar complaints, it may open an In Canada investigation, and if it finds that a safety defect exists in If you believe that your vehicle has a safety defect, you a group of vehicles, it may order a recall and remedy should contact the Customer Service Department imme- campaign.
Page 484
482 IF YOU NEED CONSUMER ASSISTANCE • Service Manuals • Owner’s Manuals These comprehensive Service Manuals provide the These Owner’s Manuals have been prepared with the information that students and professional technicians assistance of service and engineering specialists to need in diagnosing/troubleshooting, problem solving, acquaint you with specific Chrysler Group LLC ve- maintaining, servicing, and repairing Chrysler Group hicles.
Page 485
IF YOU NEED CONSUMER ASSISTANCE 483 DEPARTMENT OF TRANSPORTATION UNIFORM significantly from the norm due to variations in driving TIRE QUALITY GRADES habits, service practices, and differences in road charac- The following tire grading categories were established by teristics and climate. the National Highway Traffic Safety Administration.
Page 486
484 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades WARNING! The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat The temperature grade for this tire is established for and its ability to dissipate heat, when tested under a tire that is properly inflated and not overloaded.
Page 507
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
Page 508
Chrysler Group LLC 3rd Edition Printed in U.S.A. 12D41-126-AC...